Search results for query: *

OK thanks for all the helpful info guys. I ! Not sure if I'm going to use them on my dart or get rid of them. I have to mull it over

Or is what I have considered a mached set?

Is there a 2 1\4 for the passenger side?

The passenger casting number is 3418623. Is this one sought after at all?

OK thanks guys. I have a passenger side 1 with a casting number that says it's a 70 and up 340, but the outlet diameter is different. I would guess that is part of a different set.

They are 1\2 inch diameter

It's about 3 7\8 inches

Thanks I appreciate the help guys. I guess being a repop makescit worthless.

Please help me identify this exhaust manifold. There is no casting number a 2 3\8 outlet and a flat outlet flange. Thanks also i beleive it is for a small block

could the head just be cracked and therefore no good

small block 340

I know that the front and rear header bolts go into water jackets. But should I be getting coolant out of the other header bolts also?

thanks

I have those. The brackets seem to have to bolt to the heads and there is no holes in the block in those locations. Am I maybe looking at it wrong. I never saw how it was originally set up.

I have read on here that a late model 318 serpentine will work on a 70 s era 318, but I got 1 out of a 99 and it does not seem to work. There seems to be some threaded holes in the block that are not there on the 71 that I need to mount the serpentine that are not on the 71. Any ideas would be...

Rocker shaft plug sounds about right would anyone know where to get one

sorry Im probably explaining it wrong. It is in the head by the rocker arm not the lifter

What is the technical name for the oil plug on the side of the lifter. The valve train setup is a crane. It is 7/16" diameter. Any help would be much apprecciated.

IS the harmonic balancer on a 318 and 340 the same. If so with a fluid damper do i need a longer bolt.

by the way its a 340

does anyone know the diameter and legnth of the harmonic balancer bolt and also the diameter and thickness of the washer