Search results for query: *

Yep, I have a shop manual for my car and I will use the guide to adjust the beams.

Thanks for the info Crackedback and 67Dart273. I took the car out tonight with the Halogen lamps and found that they are somewhat brighter and definitely whiter. I need to adjust them so they project a little further out. After reading about voltage drop, I need to check that on my car. More...

Can you post a picture of that setup? Pos or neg? Right to the lamp itself? I don't have a clue as to how to do this.

OK thanks. I'll spend some time checking that stuff out.

Thanks for the info guys. After reading your responses and doing a little research, I'm going to just run them for now. I plan to install relays for the low and high beams sometime in the future. The incandescent lamps are hardly enough to see twenty feet in front of me. I pulled up some old...

Looks like the starter relay.

Wiring is in good shape. Night driving limited to about an hour so. Do the lamps get hot? Does the power draw get the wiring hot? There is nothing wrong with the switch or dimmer, just a couple of burnt out lamps. Are you running yours with or without relays?

Wiring in relays is not an option right now. I just need to replace a couple lamps. Can I use them off the shelf without mods and without doing damage to my electrical system?

I have a 67 Plymouth Fury with quad headlamps. My local auto parts supplier does not stock OEM style incandescent headlamps, but they carry Wagner H5001 and H5006 headlamps. These are a Halogen replacement that has the two and three prong connectors like the originals have. Are these safe to...

I unhooked the harness from the wiper motor and flipped the switch on, then used the probe with light (don't know the actual name of this tool) and touched it to each one of the female connections on the bulkhead. Also had the ground lead clipped to a good ground. Got nothing from all four...

Hope this photo helps. Looks like the one that's front and center as you look at the photo. Closest to the casting ear for the alternator mounting bolt.

Fuses are good.

I need some guidance on testing the wiper motor, washer motor and both switches. I'm VERY ignorant on electricals, so please dumb it down for me. I have a multi-meter, but limited knowledge on how to use it. The problem is as simple as, flip the switch, nothing happens. I don't know if the...

The wipers and washer don't function on my 67 Fury. The wipers have a two speed switch and the washer is a push button. How do I go about testing the switches and motors? Electrical work is not my specialty, so detailed instructions would be very helpful. Thanks

I would try it if the connector fits, just be ready to pull the power if you see smoke. I doubt it wiil do any harm. Good luck getting her running for MM weekend. Pics?

This might sound too simple, but do you have the ground wire connected? When I first got my 66, the yellow and black wire was cut and and the previous owner rigged up a cheezy push button set up to start the car. I got the yellow and black wire hooked back up and it still would not start with...