Search results for query: *

paypal and yes it includes shipping (IF you are not in Canada then it's another 25 more due to the darned customs and fees that get charged) PM me for address

I like the fosgate ones, but in reality the rockford sound a bit better in the lower tones,(but I"m old and half deaf now from Loud music and cars and some high pitch sounds are missing in my range anymore)

5.25 round 2.60 depth from the BOTTOM of the flange to the bottom of the magnet. 120. shipped for a bodies only members (1 set left from this run) next run in march 2021

My brother in law has size 12 triple E and since we moved the dimmer switch over 1.5 inches even his big old feet can stomp on the dimmer switch. BUT I do have to admit that he still trips the brake light when hitting the clutch:lol: (heck I had a hard time hitting the darned thing without...

67 and up they do, but Myself(paintable l ABS) and one other guy in Australia (fiberglass)makes them for the 63-66 A's here are some pics installed and in process the blue ones are Jim Keunemans 63 units And I have one set left from this run. pm if you would like a set

paint oxidizes over time, that latch has had 40+ years to turn yellow. Go remove the trunk weatherstripping and compare the 2. it should be a lot closer since no air got to the surface(hopefully) under the weatherstrip. if it's a convertible just remove the inner front windshiled pieces and then...

I'm working on making an A/C radio delete bezel for my dart and decided to show how easy it is to remove chrome and paint from bezels Tools needed 1. yellow top original Easyoff oven cleaner (contains a bit of lye as the ingredient you need) 2. plastic bag or anything to keep the easy off...

from Central Florida to Michigan and back a couple times, I can't wait to get the 66 dart done (with the 97 Sebring convertible power seats)so I can at least drive for 6-8 hours without feeling like a mule kicked me for 2 hours straight.

Got some more mold work done for the multi color floor mats. made the male molds ,now to make em pretty and smooth so they will make the parts look goooooood a little wet sanding and buffing and they should eb good to test out and see just where and if I screwed up. next step is silicone...

DAMN,DAMN,DAMN Abject failure. oh well back to the drawing board the darned gray blue bled over the red(ish). looks like I'll have to make both emblem parts and then bond them, then put them in the heel pad $%&(*&*(. On a good note I was able to get it poured in this wet humid weather. It did...

got the color test started, now I have to figure out how to embed it into the floor mat and make sure it stays bonded to the rubber,, tomorrow I'll pull the flash(and overpour) out and see what I have. the red didn't look as good as the blue since I cleaned up my hands with lacquer thinner and...

Working on shape of the floor mat now while I'm waiting on money to come in and allow me to get some more materials. drivers side looks like it'll be fine now that I modified the shape for the Gas pedal, now it'll work on the /6 and v8 cars (I hope) passengers side needs a bit of tweaking to...

Mine damned sure ain't correct, both the 70 challengers I have are modified. 1 was a 340 4speed car now with a 440 6 pack setup. the other was a /6 3 speed car. now 383 dual quads and pistol grip 4 speed console car. I put 21k on the 440 last year and will have to paint it again in the near...

Thanks, I just finished up a test piece to pour multi color design into the floor mats. (now if I only had money to get the supplies ....ah well waiting again) I'm thinking Silver for the T, Yellow for the Dart and G on a black rubber mat. I'll be getting some urethane shipped to me this coming...

yeah I'm making a set of molds for 60-69 lincoln contenintal floor mats and for my boss to sell and I figured I could sneak my design in too! here is the "outie" one just to see if the material I cut would work. (now it's gonna be a wall plaque for the garage) the "innie" design is going to be...

I use a variety but mainly Aspire and Fusion 360. this is in Aspire right now waiting on some bigger (read more money) pieces I need at least 4 pieces of 30"x30" to make the top and bottom molds since it a 2 sided piece and I have a drivers and passengers side to do. passengers side here, still...

Sice I'm waiting on materials for every one of my parts (resin, corian ABS -16 glue and ABS sheets) I decided to go forwards and test out how the male model molding part would look for my floor mats. Well they look pretty darn good to me. Now to find "damnit here we go again " More material...

yeah I worked at trenton engine, McGraw Glass plant and a little bit at dodge main.

no. it'll run really crappy , just the 2 going to the coil were reversed (not my pic I stole it!) but it's how I wired mine and it ran once I fixed the coil wiring to match the diagram.

one of mine did that and I discovered the darn wires to the hei were backwards. reversed the wiring to the hei and all was good.

I now look for that at every car show I go to. Every one I have seen is off a bit, some by a lot! even the 65's are like that.

you would be surprised with the convertible if the torque boxes are good then chances are the inner rockers are good to and it's a sturdy setup. I had mine upside down on a rotisserie without a floorpan from the firewall to the rear tail panel and it never sagged. and yeah the gaps were...

ahhh I'd probably have to have 2 or 3 posts if they still only allow 10 pic's, unless I group all my failures together. the design is (I think) ready to cut , but the hold down procedure is biting me in the begind since I only have ly little cnc running at this time and it has a MDF table...

going to test it out this week end. (got the chrysler blue paint and the epoxy has come in so I think I"m ready to test it out. (no you can't see the failures, I'll hide them in shame!:()

Thanks,looks like I can make em 2 sizes 1 1/4" and 1 1/2" (got dual 1barrel setup that would need the bigger ones.) I planned on doing an acrylic dome after carving the star and painting blue, I already did a couple domed key fobs for friends at Christmas(chevy and ford ones though but we're...

Can you get me a measurement on the size of those? I'm Thinking of testing my design out and would like to make them at least this size or a bit bigger red arrows show my needs. thanks

it's my software programs preview(what I see on the screen I'm supposed to get or in puter terms WYSIWYG) gonna try and make em. here is my little CNC making a plate for my bigger heavier and more rigid CNC so I can acutually cut 4'x8' sheet of "whatever" like plywood ABS and so forth. (lied...

Thanks, About how thick are they? I have some scrap 1/2" and 3/8" plate here I can get some small ones tested out on.

sort of like this? quick throw up with a 1/2" thick plate took about 5 minutes to setup. I'm probable going to try to cut a few out of my scrap just to see if it's workable ... are the threads 1/4-20 ? hmm I'll have to double side it for the hole and back cutting. or the raised star, I'm...