Search results for query: *

If you were closer I would trade a 6 K with conversion mounts for a v8 that I have.

I believe if you unbolt the passenger motor mount and put floor jack with a block of wood under the pan. You should be able to jack the engine up and block up the motor mount to hold it up. You should be able to unbolt the pan and slip it out. I doubt you will have much success just replacing...

Glad to hear you were able to get back inside. You could have froze to death at those temps. Been cold hear even had flurries NE of us but nothing like there. Take it slow and easy.

You can live without it as it is for radio noise suppression. If I remember it goes on + side of coil. I have seem them go bad and it kills ignition dead. It will drive you crazy ask me how I know.

Since you are not driving the car just starting in driveway I think the condensation in the muffler and exhaust system. You really need to drive car and let it warm up then step on it and let it clean out a little. You didn't say it runs bad just smokes right. How old is the oil? The oil may...

Loose bolts and metal fatigue?

Take a quart of dexron tranny fluid and put half in crankcase an other half down carb at high idle to keep it from stalling. If there is alot of gunk in crankcase it could be bad and clog up screen on pickup so be aware of this. Do the carb in open area cause it will blow alot of white smoke. We...

You need to get a set like this http://www.ebay.com/itm/Vintage-Proto-Industrial-3-8-Flex-Sockets-Universal-Sockets-6-Point-Great-/160848431332?pt=Motors_Automotive_Tools&hash=item25735048e4&vxp=mtr And wobble extension...

Nope had cap off and it was dry. Pulled a plug and spun engine no spark at all it was dead.

I put one in my wife's 66 mustang gt 289 about 8 years ago, it worked great until a few weeks ago. My wife decided to sell the car and moved it to wash and wax. She went to start it to put it away and turn over but no fire pertronix just died. I just put points and condenser back in and fired...

When it quits there is no warning,just quits. Carry a set of points and codenser just in case.

I would check the u joints hard to tell where the noise is comming from