Search results for query: *

if I remember correctly you will also have to remove front windshield so that you can remove screws that hold the dash in, you can get to the two under dash!

it is the only way I know of, unless some else knows how to remove vents!

Classic Industries part# MD113

give me a day or two to see if I can find my receipt!

I already have the one that goes on the head, I was wanting to know if there was one that was (suppose) to mount on inner fender?

my question: is there suppose to be an inner fender well clamp that holds heater hose's in place or do the just lay there and if so does anyone know who sells them. I do have the two aluminum straps that go on them already! Also if a clamp is used I do not see any hole to use on top of inner fender?

I called and talked to my engine builder and he suggested using Permatex "Right Stuff" and to put some in bolt hole first and some on the bolt! well I did not put some in hole first because I knew that some material would definitely end up in my water jacket (cooling system) so what I did was I...

I will. just a thought, I have never had this problem with my chevy's "be nice now"

I put some Permatex thread sealer on it a little while ago and will let it sit over night and if does not work I will try the tape, if does not work I will try Permatex right stuff or red Loctite.

I tried the aviation sealer and it did no work!

I bought some Permatex aviation sealer and it looks and smells just like the #2 Loctite gasket sealer I used that did not work. my question is what's the diff.

my engine is a "fresh rebuild" and I only put water in it to see if I would have any leaks! can I use the Teflon paste or do I still have to use the tape because of the water?

I have a leak on one of my water pump bolts that hold the alternator bracket on! I read the service manual and it does not say to use RTV on bolts upon assembly. my question is should I use RTV on bolts or do I have another problem that I am not aware of that is causing this issue?

got it! thanks, Bill

OK! hope so!

I tried to search for Smiths Radiator on the computer but no luck! do you have an email or phone number?

that looks GREAT! do you have a number for SMITHS RADIATORS?

that looks GREAT!

thanks for reply! are you using a shroud? Bill

I have read a couple of post and I am thinking that I am going to have to modify my core support to go from 6 cylinder to V8 Radiator? if so, what are the steps? or did I just misunderstand what the post said?

this is the radiator and shroud I got with my Duster, but, it seems that this is not the correct radiator and shroud for my duster! Does anyone know what vehicle they are for and what year?

I just went to E-bay and they have a nice set for $125.00

it is really not that hard if you have the right tools! I just went and punched a hole in a piece of metal to show you, I used the hyd. press but with this thin of metal (.0625) a large ball pen hammer would have worked. I made this punch set when I was an apprentice but I am pretty sure they...

I also just happened to have some black foam rubber pieces (2"'x4") with adhesive on one side that I have had for a long time, that were in my plastic parts bin, that I used for gasket between plate and firewall.

Yote! I got er done already, but thanks anyways I may make another one, but with thinner metal, I used 1/8" this time but I will try and find some .062 or .093 thick material! I have a shim punch set I used when I worked as a Tool & Die maker and I can punch the holes out with that, much easyer...

Ok! thanks for the info. I have some 1/8" flat stock I will use

I know that I can make one since I am a retired Tool & Die Maker but I would like to have an original one if possible! Was there a gasket behind it, what kind of material was it and would you happen to know how thick the metal was just incase I do have to make one!

does anyone have the bracket that goes over the heater core tubes on the fire wall, "for sale?" I can not find mine or maybe I did not even get it when I bought the car.

OK! THANKS FOR THE PIC "BILL"

Bill Burgess 11653 e. 30 3/4 rd. Cadillac Mi. 49601 2317790059