Search results for query: *

Thanks for response. This RV cam makes power off idle and it is done at 4800 w/355 gears I'm in second gear in what seems like a blink of an eye. Before the fbo plate I was at 15 initial and 38 total the total on the plugs looked good but the idle was dirty, so 20 was where the vacuum stopped...

I was trying to bring it all in close to the converter stall. Is that not correct?

Gentleman. My 360 smog block, alum head, 204/214 cam, stock converter, 69 dart likes 20 initial and 38 total. I'm using today an fbo plate at the 18 slot and changing the heavy spring for the light one in the kit. I have slight detonation at hard throttle. Should I switch to the 16 slot or jump...

Hey guys. This is what I found under the cam gear. 4 bolts, no dripper. Is this acceptable ? If not where can I get what I need? Thanks guys

Its a stock 76 short block, I bore scoped it when I checked the pressures. (dish pistons) I didn't install the cam, po gave me the cam card when I bought the car. It does run out of steam about 4800-5000 but gets there quick.

Shoulda thought more, long week! 204/216 650avs , headers, 355gear

Joe, I have that cam in a 360 W/.039 Head gaskets, eddy heads ootb in a dart. Stock converter, short tire. .Rusty's right 165ish cyl pressure. Pulls right off idle. Hope this helps

Righty, I'm sorry this happened to you. Every winter I think of changing to that cam in my stock eddy headed short block 360. Then I see this post. I work on heavy equipment, the parts for everything are made like junk now for lack of a better term. I'm gonna keep my 204/216 crane. Good luck...

I didn't want to get into the cam, I just wanted to put the rockers on top of the cam I have now. Talked crane and they said it would add 30lift and about 4 duration.Puts it real close to a XE262H specss with alot less work. I'm just wondering if theres a down side.

Have a 360la that was out of a ramcharger w/5000 mi. on it, put it ina 69 Dart headers,eddy heads, 650eddy on a 318/360performer ,msd ,crane h260-2 cam 427/454 260/272. stock converter, 3.23 gears, 24intire street car. I feel the motor is under cammed for the application now. I want to install...

:sign3:hey guys I have a 69 dart conv. with a 360, I think I'm leaving alot of power on the table,eng. was built for a ramcharger.It has edelbrock performer heads a performer maniflold not rpm performer and 650 carb also edelbrock.msd,headers h pipe 904 trans. and 3.23sure grip.The cam is a...