Search results for query: *

Hello All, Replacing the driver side remote mirror on my 74 Duster and noticed that the door panel seems to have a raised spot where the mirror stud goes through the skin. The raised spot looks like it could have been stamped into the door panel when new or it could be from over tightening the...

Found the mirror that will work from Restoration Parts Source, P/N:MP-160A-LHCR-PGC-1515, $205.00, long cable

i'm looking at a new mirror as well, don't mean to hi-jack. How long does the cable need to be and which mirror being sold (yearone, Classic, etc.) would be the correct one to purchase? For a 74 Duster, Thanks.

When I called I spoke with a women at first; she did not mention anything about it. I had to talk to Chuck about pricing and he was the one to explain and he was very adamant about getting there before noon on Sat. I understand your frustration but hang with it, you should be happy with the results.

davescuda, I swapped out a rear bumper on Friday. I called them and they told me to make sure I get there before Saturday at 12 because they pack up and move on. The bumper I got looks very good and makes a big difference on the car. Good luck, I think it may be worth the shipping cost.

Hello All, Was at Carlisle shopping for parts and was thinking about some door handles for my 1974 Plymouth Duster. All the major parts vendors carried them but there seem to be 2 different handles at 2 different price points. I have not had my door apart yet so I wasn't sure which type...

Hello all, Where are you getting your new bumper bolts when getting new bumpers or rechrome? As I understand it, many on the market do not hold up well. I'm working with a 74 Duster with the shock mounted bumpers. v/r Ron

Hello All, I hear good things about Tri-City Plating and wanted to reach out to anyone that has purchased from them in the last "year or so" regarding their pricing. Basically, did the price you paid match the posted price on their website? I ask because I called them about getting a set of...

Thanks Guys!! Ordered a set of AMD moldings and got them installed fairly quick and painlessly, looks good.

So, like the "69 dart", will I need to remove the existing clip? Just makes me wonder why the clip is there if it is not needed.

Thanks, did it take any special tools to install (i.e., crimper).

Hello All, Looking at getting a set of AMD stainless steel Drip Rail Roof Edge Molding Trim Set to put on my 1974 Base Plymouth Duster. I was wondering if I needed to remove the clip that is present on the current drip rail (with no trim), see pic, or does the AMD set fit over the clip? Also...

Hello all, I'm might need to replace my right side headlight bucket and retainer ring in my 1974 Duster, I'm sure many of them interchange, I just don't know which ones. Can anyone provide some info. I'm not interested in any that require additional fabrication to fit, thanks.

Doesn't anybody have anything to offer on this subject?

Hello all, Looking to replace the trunk mat in my 74 Duster. Big question, which one would be better than the other, rubber or fleece lined mat. Was talking to a guy at a car show and he mentioned that the fleece one holds in more condensation/moisture during periods of storage. Seems to me...

What does this mean?

Thanks guys, I actually got one on the stud just to have to take it back off and put it in the arm first because I couldn't get the arm on it while the bushing was on the stud. All the years I've been driving and I never realized how simple the windshield wiper set up was, a pain to work on though.

Thanks everybody, I got the NAPA ones and like poisondart said I should of done all of them. That's why I'm now going back to NAPA to get enough to do the rest. They are a pain in the butt to get on though!!!

No it looks different, yours must be from the older Mopars. I would hate to try and find some of the smaller uncommon parts for those.

I'll check NAPA out and see if they are the same as the ones at catesnorthwest on e-bay. like to support local when it makes sense even it it cost just a little extra.

Thanks 440, Did the ones you got look like this? These look like the ones I need from catesnorthwest and they look like a good deal, thanks again. What are they made out of?

Not sure what section this should go in. I have a 1974 Duster with out A/C and I need a retainer bushing for the right hand (passenger side) drive link. unless they are the same, I need the bushing where the right and left link together. Can I still get this bushing or a replacement, anybody...