Search results for query: *

with more searches,These carbs are likely too big for a 340. Here is a quote from a tripower site about the 4782 center & 4783 outboard carbs: " As Tom Vaught from Ford Motor Company indicates, these were developed specifically for Ford for the 429 6V intake as well as the BOSS429. They...

I did modify a Mr gasket Chevy thremostat housing to work. I think Obrien Truckers might have the finned air cleaners I need. Some web searching on the carb to find the proper baseline main jets, I found the same info on the carbs. They are definately Mopar high performance replacements for...

Thanks to all who replied. I will get what head numbers I can see. John; thanks for the reply. I already cut the risers, but did so in a way that they can be re-used with long studs. Can you post any info on the air cleaners you have? I found them on ebay when you showed them a long...

Gas is going down; it's time to add more carbs :)

Where would I see the AAWJ? The 360 is all by itself from what I can see. There is a casting number also, I may be able to see the whole number

These were ID'ed as older "direct connection" over the counter carbs for "off road use". They were auctioned as Tripower Vettes, but some onlooker knew the numbers and posted the info on what they really were. They are mechanical outboard carbs, not vacuum controlled.

These covers are OLD, and there is no PCV, so maybe they were designed for 273s when the 273 first came out. Thanks for the info.

I have a 69 Dart with the wrong 340. It has a 73 340, but the heads say 360 inside the valve covers. -what else should I look for on the heads to know how good?..or bad? I am putting on a 6 pack with a shortened-down intake so I have room for air cleaners with the stock GTS hood...

Just to let you know about quality & issues from the old days; In summer 1970, I bought a 69 Swinger 340 4spd 3:91 with 13,000 original miles. The car was mint, adult owned, all stock right down to the hubcaps. I was on the highway going to work and another 340 dart was in the slow...

We just did all the plugs on our 69 340. Stop leak probably won't stop any of it because there will be a lot of sludge behind some of the plugs. We went to an engine machine shop here to get freeze plugs (because the parts place didn't have those sizes), and they talked us into the brass ones...