Search results for query: *

Valve body bolts ? So I guess I will have to drain the fluid out to check this... Thanks

I guess you could say starting to shift then slides into gear.. Been doing this for about the last 300 miles.

Ok guys in my 340 I have a 727 tranny with Trans Go Shift Kit along with a B&M Quick Silver Shifter with a Custom JD Convertor 3500 stall and a Transmission cooler and the problem I have is when the tranny is cold it shifts into all gears quick with no hesitation at all and I do shift this...

Thanks

Thanks

What is the torque spec for a 727 transmission pan gasket using a 3/16" reusable gasket. I have seen anywhere from 7 ft lbs up to 12 ft lbs. Thanks

Problem solved. The tube somehow came out about a 1/2" when I had tilted the motor and then when I anchored the tube bracket back onto the stud I never paid any attention to it. So I was able to push the tube back into place. Started up while on still on the jack stands and ran in drive. Checked...

Ok Thanks Lefty71...

Ok bit of a problem here. During my Header replacement install in my 340 Duster and when tilting the motor up on the passenger side my dip stick tube may have got into a bind against the fire wall because now their is oil leaking out from around the base of the tube. My question is what is the...

I am running a Ford 9" with a 3.89 gears and when cruising down the highway at 65 mph with my tach reading out 3500 rpms , which I am not too fond of, I pretty much dont do much highway running, tend to stay on the secondary roads. I had thought about swapping out my gear set to something a...