Search results for query: *

bleeder on top.

OUCH better be good 1964 PLYMOUTH VALIANT Doug's Headers D450

Doug's has headers for an early A?

You can extend the bolt holes on you 7 1/4 to get you by till you get your 8 3/4 shock plates. I ran mine like this for 2 years and beat on them hard. You will still need 3" wide U bolts.

https://www.summitracing.com/parts/mor-85090?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-moroso&gclid=Cj0KEQjww7zHBRCToPSj_c_WjZIBEiQAj8il5JyvQRJXmY211qYm66Nlry_5JiFTxWBvyuvCQCZswlsaAmZf8P8HAQ These are the correct size for the locating pin on your springs. They are absolutely necessary...

Your probably right, it's been a while. Is there a rear distribution block? 1959-1976 Mopar A B E C Body Rear Axle Vent Tube Fitting Brake Hose Tee Mounting | eBay

MOPAR DODGE CHRYSLER REAR 8.75 8 3/4 SHOCK U BOLT MOUNTING PLATES | eBay You might also start a wanted thread for the shock plates. The vent tube might work off your 7 1/4, just try it and see, if that is what you are referring to.

All my brake parts on my BBP 7 1/4 switched over to my 65 B body 8 3/4 (except brake lines). That's all I know. Might want to hold on to your old stuff and see. :dontknow:

Sorry, don't know about that, just what I had. SBP front - BBP rear :glasses7: When I took it out all I can say is it looked like it had been there for a long time.

My 7 1/4 brakes were off a 72 Dart with BBP. Fit on a 65 B body 8 3/4 rear. I think it would have to be a BBP 7 1/4 to work.

Yes. Did it on my Dart.

I used the backing plates off the 7 1/4. Short answer would be use the ones you want.

Got the rotors and calipers mounted and I notice that my old hard brake line mounts on the back side of the brakes and my caliper is mounted forward so do I need the 75 soft brake line or something else? I also got the hard brake lines off the 75 but I'm not sure they will fit (think I broke one...

I have a 72 dart and I got all the parts for my front disk swap off of a 75 dart. I took everything apart for the disk brakes, cleaned them up and bought new parts. Now I have a pile of parts and am not sure which side goes where. Spindles - how do you tell driver from passenger side? Calipers -...

Already have the rear end change, BBP, and I also have manual brakes. Does that make a difference on the parts I will need? Have searched posts and was just looking for a simple answer.

I am looking to buy the disc brake set up for my 72 dart. If I were taking the parts off a 73+ dart what all would I need to get? Or if I was telling him what all I needed what parts would I list? :newb:

Why? Why? Why, doesn't anybody make BBP drums for a A-body? I can see that alot of people are looking for such a thing. I just don't want to do all that for BBP. My brakes work fine. Only problem is 4.5 on back and 4 on the front. Looking at new rims and don't want to have to have two different...