Search results for query: *

Take a look at this threads and the link to Engine swaps, give them a call so you can find out when/ if they will be bringing back the spool mount slant 6 to small block conversion mounts. Schumacher Creative Services These are the conversion mounts you would want to ask when they will have...

Is this it? Small block in a slant 6 abody 67-72 cheap and easy using truck mounts

Can you please post some example pics of said solution.

If I recall correctly, the two mating with the timing cover are longer. Makes sense as it is a through hole instead of blind, and more importantly it is to the softer aluminum cover.

I have seen similar before, looks like engine was run with head gasket or other failure to allow cooling fluid into the oil and that mix producing the usual milky frothy substance, and also rusting.

Sold widely, price varies, but you can get it for $15-$20.

Ah, I get you, makes sense and 318 mounts are usually reasonable in price. Here is an interesting thread for reference. what mounts are these ?

Don’t know if possible in your case, but I would be inclined to modify just my own single 273 mount, rather than buying a pair of 318 mounts, and still having to modify one side anyway.

Take a piece of hardwood and place on underside of one of the head bosses which projects out some, where you can catch the end of the wood block and strike other end with a hammer.

I was scratching my head on a similar issue a few months ago, and found it was a vacuum leak. I had checked all areas multiple times that I suspected had leaks at and around the engine, but as it turns out the leak was on the brake booster. Mind you I have had booster leaks before, but this time...

OK, thanks!

Hey AJ/FormS, what do you use as a stabilizer?

Dang! I am bringing out the sledge tomorrow, been holding off on doing the needed and putting up with vibration and rattles near torsion bar and gearbox interference due to me not wanting to reduced cross sections on my headers. Will just need to be about 1/4" on a couple of pipes, thanks for...

^^^^^^^^^This, it just looks like old gas, oil,grime stain on it, or rat piss.

Did a search and found these two quotes related to Doug Dutra, the first with a link her to the entire article. http://www.slantsix.org/articles/dutra-blocks/slant-blocks.htm "A comment on block cleaning: First remove all the plugs and get the blocks "hot tanked", then take a close look at...