Search results for query: *

I made a push in breather with a pcv for my Ramcharger, but ended up making a smaller one out of a chrome oil cap. This is a chrome breather I drilled a hole into, then added a rubber grommet and pcv valve. I pulled out the inner material. It comes with a 1 1/4" grommet for the valve cover...

Any other parts left for the Ramcharger? I need some interior lenses and a rearview mirror.

I don't know anything about the motor - if it is standard, .020 over, nothing. I need to know what rings to buy. The cylinders were clean and are just getting a dingle ball to clean them up. Stock pistons, new cam and lifters, intake and carb. Nothing big, but it will be an improvement over the...

I am ready to start assembling my 440 budget build. I need to measure the bores, and I don't have a bore gauge. No one I know owns one, and I don't want to spend a fortune on a tool I will use once in my life. I can buy a China made piece of junk for $50, but then I wouldn't really trust it, and...

I had this driveshaft made when I put the Dana 60 in my car and it still had the 318 / 904. I wanted 1350 u-joints on both ends, but apparently there wasn't a yoke for the 904 in that size, so it is large Mopar u-joints. It is 47 1/2" center to center on the u-joints. It was made with what they...

Why would you post them for sale and then not sell them? It's not fair? You sell them to the first person who replies. If that deal doesn't work out, you go to the next person who replied. My date for senior prom didn't tease this much, for Christ's sake.

Sold!

Sale pending.

I have the windshield washer reservoir from my 73 Dart Sport for sale. It has some light crazing and the mounts are intact but cracked. Asking $15 plus the ride from North Branch, Minnesota.

I have an RPC 24" stainless steel radiator hose kit. It has 24 inches of hose, 2 chrome aluminum end caps that hide the hose clamps, adapters to make it work for 1 1/4, 1 1/2, and 1 3/4 hose and the hose clamps. It is very sharp looking. I have a Coolflex upper hose on my Dart and wanted the...

I have a set of Moroso tall billet aluminum valve covers for a small block Mopar. They originally came on my 408, but I went with Mopar Performance covers and never used them. They are in great shape. They have been notched so they sit flush along the intake and don't leak oil. There are a few...

Hey, Valvoline was closing out their synthetic VR1 oil and I bought about 5 cases from a buddy of mine at O'reilly's. He knew I liked synthetic high zinc oil. I bought it at $3.99 a quart. Unfortunately I use Amsoil Zrod and really have no use for this oil. I will sell it for what it cost me. I...

Hahaha! My brother - here in Minnesota just pulled his 7 1/4 shortened rear to put in an 8 3/4 this weekend. I thought this was his post. I was going to post a smart *** comment, but I guess I'll just keep my mouth shut now. GLWS!

That's a good price. I have a similar motor with 11.8:1 compression. I have put almost 13,000 miles on it, hard and easy in the last two summers. I run 93 octane normally or tune it up for 110 octane. After all those miles I am hitting the track for the first time this Wednesday. It is strong...

I am going this route, but have only set total timing, not base and then installed the bushing. I am running a 408 as well. Do you have different sizes available? I will check my timing this Saturday and will know what I need.

PM sent. I'll take the number two spot!

My brother is running a big block Dart. I'll talk to him.

Man, I love those intakes. If they fit my SB I'd snap them up and pick them up to save shipping. Throw them in the dryer - maybe they'll shrink to fit my SB!

I sent a driveshaft through USPS. I wrapped it in bubble wrap and plastic wrap and carried it in. Big and long and odd shaped and it cost like $18 to ship across the country. I love USPS.

I personally don't care what shipping costs. It is what it is. No one is making a profit on it. I ship USPS if possible. If someone doesn't like the shipping costs, there is not much you can do. It's an incurred expense. Never tried Greyhound, though I have heard of it. It just kind of worries me.

A body radiator sold. The other is apparently out of a C body but was in my brothers Charger, and it is still available.

Then it was from the Charger. That was a 383. I have been told the number translates to a C body, but neither my brother or I ever owned a C body.

3574 605

It was on the car when I bought it. I drove it all summer last year until I changed the motor and tranny last winter. I don't know enough about them to say why it fit or if you need a three piece.

Bump

Holy crap are they getting some big money for these things on eBay! I just want mine to go to someone who can use it. I had it in my 73 Dart Sport with a 318 and 904. I went to a 200R4 and a TV cable, so this is just laying on the shelf. I will let it go for $40 plus the ride. US shipping will...

I sold the left side, but still have the right. This pivot works perfectly. No binding or stiffness. I cleaned it up and painted it and it looks fantastic. The OE part number on it is 3431680. $25 shipped anywhere in the lower 48. My Canadian brothers can have it for $20 plus whatever actual...

bump

I have the original two row radiator from my 73 Dart Sport 318 / 904 set up. It is in very good condition, with no leaks. I used it until I went to an aluminum set up. I cleaned it up and painted it. It has four marks in the fins where I had mounted the external transmission cooler. There is a...

Shroud is sold.