Search results for query: *

I should have mentioned it earlier, I have a relay for my ignition and my starter. With that said, the switches that I have should be ok?

Everybody was so helpful with my neutral safety switch problem that I have another question. This is for our 89 dodge d-150 that is strictly a drag truck. My Ignition, Starter, Fuel pump and Electric Water pump are all on toggle switches. The switches that I have are the cheap ones from...

I would like to say thank you to everybody who responded to my post. I was having a difficult time understanding but after your help and working through it I was able to get it to work. Now I have to get a new NSS. There is continuity when in neutral but not park. Also verified by...

Thanks for the info.

Thanks for the response. So I could take the pink wire that is on 86 now and run it to the start switch. The other side of the start switch would go back to 86 on the starter relay. I will try it as soon as I find a replacement 70 amp Maxi fuse. It blew today when I obviously had it wired...

I tried like you stated above and I get nothing to the 87 terminal on the "starter relay" when I flip the starter switch. It was in park at the time. The 86 wire that I put to one side of the has power all of the time when toggle the ignition switch on. When I do that 85 then has power...

Forgive me for being ignorant. I learn by doing or seeing. I would understand if you are getting frustrated. So, 85 on the "starter relay" goes to the center pin on the NSS? 86 goes to the + side of the toggle switch? Does the toggle still get grounded? 87goes direct to the starter...

I'm still a little confused. Place the NSS where the start switch is, I would wire the NSS as if it was the start switch, then the pink wire from term 86 will go through my toggle switch? Would I only use the center terminal of the NSS?

Thank you. I think that will solve my problem. I appreciate your help.

Thanks for looking, if you look at the manual I have it wired like page 19. I forgot to mention that this is a drag race truck only. There aren't any back up lights (or any other lights for that matter). I have the 3 prong switch. If I understand what you are saying I only need to use the...

I'm hoping somebody can help me with this problem. To say I am challenged when it comes to electrical problems is a huge understatement. I bought and installed the Painless C.S.I. wiring harness that is very basic. Used for charging, starting and ignition. I have it all wired in and...