Search results for query: *

If anyone is needing items like package trays in a particular color or speaker combination, let me know as I typically only bring black and speaker combinations. Have had several Duster / Demon request. The same goes for carpet and head liners, I only bring black unless I know of a requested...

We will be bringing a large selection of new reproduction parts. Our tent will be located right near Building T in rows H and I in spots 138 through 143. If there are any special request, please drop me a message. For those members here who do not venture over onto the FBBO site, here is a...

The swap meet area of Carlisle is approximately 2800 spaces. As of yesterday, there was only 3 spots yet to be sold. The plan is to take some of the car corral area and use those spaces for overflow swap meet spaces. With that said, that is one huge swap meet to most event standards. Like...

We will be bringing a wide variety of reproduction parts. Picking up at the show items like package trays, seat dividers, molded hood pads and trunk mats can save you considerably due to the rather large sizes. If you have any special request for ACC carpet, AMD sheet metal, etc, please let us...

Here is a link to the FBBO Carlisle information. The tent is all set for this year along with some chairs and tables. I know that some of the members are over on the FBBO, FCBO and FEBO sites and all are welcomed to stop by and say hello. There are planned activities as meet and greet times...

Did anybody attend this event? Wonder how the turnout was, thanks.

For those of you looking at purchasing any reproduction parts, let me know of your needs and we will attempt to have them available for customer pickup on July 8th through the 10th. This can save you the shipping dollars which quickly adds up on the larger items like sheet metal, carpet kits...

Dave and Cheryl was able to get in today and set up the display for tomorrow. They have a brought a good selection of reproduction parts, but we have gone from seven spots to two spots. As @Go Mango posted, cannot see taking a full setup when the attendance has already been limited to a...

@Jadaharabi , I have no ideal on what they actually look like. If I had the size and a picture, I could possibly match up. Dave will not be bringing any of the hardware bins to Indy, so I would need the information provided so that we can look and pack with the items to be brought.

@1969cuda340 , Dave can bring the correct nuts for the hood scoop studs. Do not know what is the correct screws that your needing. If I knew the size and length, we most probably could source them for you.

For those attending the event, I have decided to drastically cut back on this event. If there should be any special request for the Dale's Cuda Shop, Quirey Quality Design or Restoration Parts and Materials Product line, please let me know prior to February 19th. Dave will be bringing a...

With the expenses to do a show as a vendor, unless the event is less than two hours or so away, your traveling larger vendors will not be able to justify two shows even spread out over the year. Many of the vendors are realizing that the shows are very costly to attend and takes away from...

For those who attended both events, can anyone report on how the two events compared as for as the number of vendors, show cars and spectators. The only report that I heard from a vendor attending the FMA show was that vendor count was down by more than 50% as well as the spectator count from...

I am afraid that nobody is going to come out as a real winner under this scenario. I have spoke to several other vendors who have been attending the shows for the past couple of years and I know of three who will be staying at home for both of the weekends in question. By diluting the...

Each one of the different activities has an event coordinator and I can only suggest that you reach out to that particular person. I know in talking with them over the past couple of weeks, I took it as they have a determined amount of slots open for the different activities. That way, they...

For those who are looking to attend this event, be aware that all of the activities are limited to preregistered entrants. There is a cut-off date for registration and you will not be able to drive up and register at the gate. The FM3 Marketing Group is promoting the show and everything goes...

Unless things should change between now and the show dates, we will be at the show. We have been on the fence, but hopefully we will be at least able to cover the cost of the event. Our tent will be located next to building T in rows H and I in spots 137 through 143. We are down sizing...

Citing COVID-19 fears, Pa. Health Department sues in bid to stop 100K from attending Carlisle car show

Spring Carlisle has been rescheduled to May 27th to the 31st. Fall Carlisle is scheduled for September 30th to October 4th. Factor in the Corvette show, August 27-30, which is larger than the the Mopar show and the Mopar Nats in Columbus scheduled for August 6th-9th. The Hershey AACA show is...

Right below Building T in rows H and I in spots 134 through 143. Probably the largest assortment of weatherstripping on the grounds. Also a wide assortment of various other restoration parts from battery cables to washer bottles. Also will have the Dale's Cuda Shop and Gary Goer's product...

We have been vending at this show for seven years and the attendance this year was the largest that I have seen since we started. There was four of us working our spaces and from 9:30 to 1:30, all of us typically had three to four people in line asking questions and another three to four people...

Deanna from Indy Cylinder Heads sent me this listing of those registered as commercial vendors. There are a couple more not on the list. The list also does not list those who register as a "swap meet vendor." Hope that this might help if your looking for someone in particular.

If anything in particular, let me know. Will start loading out on Wednesday and pull out at midnight on Thursday/Friday for Indy.

Eric, When you say that your on the East side, are you referring to the second hall where the food concession area is located? If that is the case, your very close to us. We take up the entire wall across from the food concession stand / restrooms. We sell a variety of reproduction parts. A...

@1969cuda340, we will be vending at Indy. That was one reason that I was wondering about the Columbus show as it might help to set the tone for Indy. Stop by and say hello.

How was the turn out for this event? Years ago, we use to attend the Spring Classic that Jeff put on and had good results. Just wondering if there was a decent turn out of vendors and buyers?

I am afraid that this will be the death sentence for the joint effort of a Mopar show for the world as we know as a Garlits / FMA event. Participants will not come out to support an event when the attendance drops to the point that it is nothing more than a glorified cruise in. As a vendor...

I see that the Florida Mopar Association is scheduling their show November 13th through the 15th. This is not going to be a good scenario for either show as I know people were grumbling about a divided show last year on that Sunday upon hearing about that. Wish that they could resolve the...

The swap meet is good, but I do not know if it would be good enough to drive 700 plus miles one way for the event. For us, it is 508 miles one way, but as being a vendor, it is a very good show for us. Unless you purchase a Friday pass, the swap meet is basically a one day event. Friday is...

Indiana State Fairgrounds 1202 E. 38thSt. Indianapolis, IN. 46205 Vendor Setup March 6th Public Viewing March 7th & 8th, Opens at 9:00 AM Ph. 317-862-0226 The upcoming Indy Cylinder Head Show is only two months away and features many of the larger restoration and performance vendors in the...