Search results for query: *

Yes that was my original concern as shown in the photos. I couldn't find a bearing made w/ the correct ID / OD. However looking at it more today, I centered the lobes under the lifter bores and the cam would need to move about 3/8" rearward to allow the bearing to contact the block. I'm...

Anyone install a Milodon 13000 gear dive on a 60mm Cam? I'm currently attempting, and the thrust bearing supplied only contacts the block about 1/8" of an inch. Searched high and low and there doesn't seem to be wider options. So just wondering if its a concern or not. Thanks

Good info , Thanks. This will be a four-speed car w/ sintered iron clutch so I should be able to keep it in the sweet spot with a heavier crank and gear ratios. Similarly, I put a lightened flywheel in a Ducati air cooled twin. It would lug if you didn't bring the rev's up when taking off but...

Did you reduce E.T.?

Planning a NA big block drag only engine. I'm cubic inch limited so need to make the most of it. It will be injected on alcohol. Looking at a 4.15 stroke, 480(ish) c.i. Anyone use a SCAT pro series lightweight cranks? Do you like them , is it worth it? How much weight savings is there over a...

Quain is Southeast Gassers (SEGA). I run w/ SEGA, and know for a fact you can run a 67 or earlier. Southeast gassers has nothing to do with the Northeast club he was referencing. The SEGA rules are on their website.

mine is 9.6

Rocket - thanks that's what I thought for the heads but does the intake need to be modified in anyway?

I believe when they set them up to clearance the pushrod it notches the intake mounting flange on the head, not sure on the intake that's why I was hoping for some pictures.

I guess I should have told her I had an Indy intake. I called and just wanted a set of bare un-ported heads set up for 48 deg. She told me they usually don't sell them that way and needed to get me a price. When she got back to me said they couldn't sell them w/o an intake. Oh well

Anyone running Indy 360-1's on a std. deck 48 deg. block? If so does the intake need to be machined to clear the pushrods? Any pics would be appreciated. The reason I ask is I wanted to modify a 3 piece mechanical injection manifold from a w-9 to fit the Indy head. I have the 360-1 gaskets and...

I run w/ SEGA. I cant speak to the NE club, but you could technically run a 68-69 A-body in SEGA if you made it appear 67. Most of the nostalgia groups use the '67 cutoff to keep the Camaros out. And you can have a lot of fun w/o a $50k engine. I recently put a link to mine below detailing what...

There's really not a lot of fancy internals. 59deg R1 block, Molnar bottom end, Bullet Roller w/ Bam lifters, Hughes Big-mouth heads. I did the Guitar Jones Oiling mods and its still going strong after three seasons. Launching @ 7k+ shifting when the tach pegs at 8k. Its on race gas so it can...

1966 Barracuda Gasser "Suspect Device" Is Epitome of Vintage Cool If anyone ever makes out to a SEGA race be sure to stop by our trailer.

If you are having trouble kicking over your AC this helped mine a lot. My 10 year old Honda 3000 would start my AC, but lugged it pretty hard. Now it barely changes rpm. SoftStartRV – Starting RV A/C Units From Anywhere, With Limited Power

I also run w/ a Lance. I recently put a soft start on the AC. Not cheap, but huge difference in the starting load on the generator. I have an old honda 3000 and it lugged it pretty hard. Now you don't even notice when the AC kicks on.