Search results for query: *

Does it look like this? If so, RT specialties has them........

I believe varsol is a paint thinner something like mineral spirits. If so, it should work like kerosene but is quite a bit more expensive.

I bought a set of the US Car Tool Connectors for my 68 Barracuda but have since changed directions and am going to go with the 2X3 steel tubing (only because of laziness and lack of welding skills). Anyone interested in a good deal on the US Car Tool Connectors, send me a PM. Russ

Try spraying the undercoating with kerosene or laying kerosene wetted rags on it (if surface is vertical). Let it soak and repeat daily until the undercoating starts to soften (usually in a few days). Then wipe off. This method worked for me with no paint damage. Caution though, do this in a...

Is that trim stainless or the chrome covered plastic? I'm about 99% certain that the 67 Barracuda used the plastic type, I assume the 67 valiant would be the same. Most everyone upgrades their 67 Barracuda's to the 68 and up stainless. One other question, is the Valiant a hard top or post...

Does anyone have pics of this trim actually mounted on their car? They look like real beauties. My concern is how well do they fit. I will order a set in a heart beat after seeing a picture of a fit that looks as nice as the part.

Nope, 68's were the first model/year in the Barracuda line to be equipped with the hood mounted turn signals. I believe other A-Bodies, (Dodge cars) were but not Barracuda's.

That's called roof rail weatherstripping. Several venders sell it. Do a search on Ebay. Prices start at about $70.00 for both sides. Russ

I stand corrected. (where's my glasses!!) Same issue, the 69 Grilles will not fit in the 68 header panel. Russ

Before changing the header panel, keep in mind that 69 grille assemblies will also be needed. 68 or 67 grilles will not fit in the 69 header panel. Russ

This worked for me.......In a well ventilated area with NO OPEN FLAMES OR OTHER IGNITION SOURCE, use a pump up weed sprayer to apply a coating of kerosene to the entire underside of car. do this twice a day for about 4 days. By then, most of the undercoating with be softened and literally...

Not to hijack the thread but would the 67-69 Barracuda be the same? On my 68, the spare tire D70-14 protudes above the trunk floor by about 2 inches. I would like to see a picture of the trunk board installed also. Russ

Thank you, I'll give them a try......... Russ

Can anyone post a picture of an original clip that was used to attach the rocker panel spear molding to a 68 Barracuda? I assume that these clips are not being reproduced. Any ideas on what to use would be much appreciated. Russ

Anyone have good instructions on how to remove a rear quarter window on a 67 Barracuda Notch Back? If so, I could use some advice. Thank you, Russ