Search results for query: *

The head is stock with new springs. The cam is new, but I don't recall seeing the cold lash setting on the cam card on anywhere else on the paperwork. Something else was weird from Isky, the stock rocker shaft had metal shims between the rocker arms. But Isky sent me springs instead. Ever...

I have looked everywhere (Mopar book for 1964, Chilton's) and can not find what the cold setting is. There is the setting for Hot but nothing for the Cold setting. The engine is a 1965 Plymouth 273 solid lifter car. Anyone who knows what the COLD valve lash is would be appreciated. I changed...

EGGE, doesn't have any of the 10.5 to 1 and don't know when they will make them again. I called Kanter and they have in stock, the cast 10.5 to 1 for $426.88 plus rings at $72.00 I think that I might go that route. If not would taking 15 thousand off the heads and intake make a big difference ??

I am going to put in the Isky E-4 cam, car has a 500cfm edelbrock 4 barrel on it now.

I have a 65, 273 motor with 8.8 to 1 pistons in it with solid lifters. I am looking to put the 10.5 to 1 pistons in it. Will there be valve to piston problems or will the gap be large enough. I believe the heads are a stock variety of the 1965 273 2 barrel carb car. Does anyone have any...

Was there ever a stock or aftermarket 2x4's set up for the LA273 with the 380 or 350 cfm carbs ?

Diamond pistons in Clinton Township,Michigan will make you what ever size you want. Look them up, check them out