Search results for query: *

  1. C

    DIY Toe-In tool w/pics

    i have to say not many people around that remember the old way im 67yo and learned that way when i was lets sau around 15yo the difference was i would spin the tire and while it was spinning i would spray it with WHITE paint then i had a block of wood i took a nail drove it into...
  3. C

    Caltracs??? Any good???

    you can build your own caltracs for under $100.00 and they will be just as good as the caltracs
  4. C

    Is there an inexpensive way to get large bolt pattern

    you can always have the studs removed weld all the holes and redrill for big bolt
  5. C

    Anyone Lengthen Their Wheelbase?

    all i did was weld the hole in the spring perch and redill the perch 3/4inch forwardand slid the rear back to center that axle seams to be ok
  6. C

    poor man subframe connecters duster/demon

    being thrifty isn't that same as cheap and why buy it if you can build it
  8. C

    PS Pump for 273 small block, what will fit?

    are you looking to stay with a stock type pump if not i have found that the prower steering pumps off GM's from the 80's and 90's are very small and can bet tucked away on the lower side of the motor with the stock GM tank or a nice sux. tank the street rod guys are useing them make...
  9. C

    Air Suspension

    just remember one thing when going to air ride say what you want but it isn't a good ride might handle nice but the ride will get rough
  10. C

    Just in - brand new 61-page free PST catalog

    i think you read that wrong he wants $575.00 for the PST sticker and he throws the springs for free
Back
Top