Search results for query: *

Here is one done by a local shop down here (shared with me by another member)

Thank you for the info and picture - looks like I'll be posting in the "part wanted" section to find one!

For those of you who either have a factory A/C 66 Barracuda or have already added the factory set-up, does the lower pully (on the crank) need to be changed out as well? I have a few factory systems I've picked up over the years, but I don't recall if in my parts horde I have a different crank...

I believe that the seats out of a 66 Dodge are also the same but with different vinyl - I had a set in my 66 cuda in high school and the bolted right in and looked identical other than the vinyl pattern

Thanks for the response

Has anyone tried it or knows if a driver's side rear quarter panel from a 66 4 door Valiant can be used to patch a 66 cuda quarter? I know the distance from the wheel well to the door jam is significantly shorter because of the back door, but is the area wheel well up and back the same?

dart65 - will do I'm going to my storage tomorrow and will let you know after

It is from a 66 Barracuda/Valiant but I understand it is the same for the Dart 63-66 - there is one on Ebay for $125 that has more pictures. If I have one to spare I'll give you a better deal than that. I'm in the process of adding factory air to my 66 B'cuda.

If you are looking for the one in the attached picture, I may have a spare to sell - I'll check my storage

Thanks dan - good info

what I saw was Moparleo was 67 - up only

Anyone have a line on where to have 1966 and earlier door hinges rebuilt? I'm only finding 67' on up for A bodies.

I'd be interested in one of the 2 1966 complete front grills with nice emblems if your selling

Does anyone know if the clear plastic owners manual sleeve/holder is being reproduced by anyone? Mine along with a near mint owners manual for my Barracuda was trashed by a water leak in my storage unit. I found the manual is being reproduced so looking for the sleeve now.

I have a buddy parting out a 66 Valiant - but were are in Orlando Fla so not sure how to get it to you.

I would be interested

If you look closely at I believe it was motor Trend test drive of the "new" 1966 Barracuda, the can in the pictures has the "V" grill emblem. (as does one of my B'cudas). There was on on E-Bay not to long agao which also had the "V" grill emblem.

Thanks Rick - I'm sure that I'm not the only one who would be interested in a quality repop of the 66 ones

Rick@Laysons - are you guys going to ever repro the trim rings for the 66 cuda?

The 2 holes in the driver side fender behind the wheel well were for engine call out emblems. Either "commando V8" or "V8". I don't believe they were ever put on Formula S cars from the factory since those got the round formula S badge below the Barracuda name on the top front of the fender. My...

I have my grandfather's 66 Formula S and non S V8 66 cuda.

Put me on the list for two sets of black ones!

That's for the parts offer whitepunkonnitro

Good point 396 Signet ... I'll know better once it is out. I know some of the wires have been altered because I did it back in high school (I've owned the car since 1982)

I'm getting ready to pull the dash on my 66 Barracuda and I wanted to replace the wiring harness or harnesses (just don't trust the 40+ year old insulation) while it is out. I will be overhauling the heater box and fresh air vents as well during this endeavor. My question is can anyone...

xx

I do - I just post them along with one of a NOS temp gage I also am looking to re-home They are all on my photo page --In the Member's Photo Gallery section -

As stated in 1966 the grills interchage size wise. If you know someone who needs a 66 Valiant center grill section, I have two extras including an NOS one.

hellfirechrome - Where did yo pick that up it looks brand new?

Sep 9 1965 for my "V" car