Search results for query: *

Yep, I just crack the bleeder screws and remove the MC caps and let them drip for a bit. At first nothing might come out but give it some time and watch them bleed

Just case the new cars use it doesn't mean its the best ! if only more people could understand that. Newer at one time might have been the best, not anymore

Sounds great but are they from China ? Not saying its bad, just wondering who is making them

The M/C will get toasted if the pedal goes down too far. Hmm, you mean the seals inside the bore might get ripped if the travel outside the bore in a rough casting ?

Quote 67Dart273 " To repeat. IF THE DRUMS have been turned too far oversize, the shoes will now "in effect" be too small. This means they are only touching in the center of the arc of the shoe, and very little of the shoe surface is doing anything". Thanks for explaining the arc of the shoes...

Well that might be how it came with but no reason you can not use a newer hose that screws in to the block.

Take a small piece of 2 1/2 exhaust pipe and pound one end down enough to fit snug over the dust cap. Works perfect and yu should have some extra pipe laying around the place

Yes. best point about the A bodies is the lighter weight and the more you remove, the better still. Get it down under 3,000 lbs and it feel like a different car. Just don't let very weak legged people drive the car

X2, sometimes you need to make stuff work

Well try to tweet them or worst come to worst replace them. How much is straight brake line

Unbolt the exhaust pipes, start it up and gun the heck out of the engine, the noise vibration should loosen things up:snakeman:

Back brakes should work pretty easy, its called a resistual check valve (not spelled right) keeps 10 lbs of pressure on the back brake lines so the brakes work quicker. Contact Summit racing-Jegs, a brake shop (but many might not have even been born when drum brakes were around). Goes in the...

Lift the back of the car up with a floor jack and place the trans in gear to make sure the back brakes are stopping the back wheels. I have seen wheel cylinders go bad were they leak air back in will not work--you bleed them they work for a while then stop working but do not leak brake fluid...

I used cardboard in the past as a template...the free USPS flat rate boxes work good, he he. If you have a drill press it should be easy enough to do. If you have some scrap sheet metal use that as a template once its right, cardboard is easier to work with but sometimes gets off a bit. In...

Another thing is does your wife and or girl friend or girl friends :) Ever drive that car? Even if its just once in a great while you should keep the power brakes. I had some Close Calls but luckly was able to stop or swere while braking, not so luckly in staying in control or not seeing a stop...

Yes those work great but do not say whats it for or they might not sell it to you. I even use those hardware store ones 20 years ago and it work just fine but yeah get the better ones. I only had the car for a year till it went to the junk yard. They are easy to use, make a clean cut and put the...