Search results for query: *

Thanks for the input. I will be using a/m disc set up for brakes and leaving the wheel wells stock.(although) Never considered a mini tub. The car was /6 and the rear is the last piece to the puzzle. Sick of doing the one wheel peel. Thought I would have blown the 7 1/4 by now.The 8 3/4 housing...

I will be purchasing a strange s-60 complete rear package for a 70 dart. Wondering if I should have them make the rear 1 inch shorter than stock. (1/2 inch off each side) For tire clearence purposes. Would like to run 17x 8 with 4.25 back spacing. 245 45 17 tire. Thanks in advance for the...

Too bad cosgig the backing plate I have is a pass side. Still working out the details. Thanks for all the input guys. Think spring here in upstate N.Y.

Thanks, I still need a small bolt pattern b-plate but was able to order all the brake stuff from auto +. suprised how much stuff they had in stock. Need to call Cas ( dr Diff) for some other items. Ducks in a row = Dart to Carlisle! To Hell with that new Chally. We are going old school.:icon_smi:

o.k. Thanks guys. I have a set of 8 3/4 backing plates from a cuda which i believe are for a 11 inch drum. (I have one backing plate that came with the housing and it is smaller than the set from the cuda.Since I need drums also(new) should I use the cuda backers or won't they work with the...

I have a 7 1/4 in my dart now. Building a 8 3/4 with small bolt pattern axles so I can use the existing rims. Will the backing plates work from the 7 1/4 ? When I purchased the housing at carlisle a few years ago it came with only one backing plate. The only other ones i have are from a 70 cuda...

Thanks for the input.I should have put this in the exhaust thread?!

O.k. New to posting here. I have been bottled up in the garage for a few days due to local flooding, Binghamton N.Y. Put the trans in tonight. the right side header hits the steering linkage(already installed 1/4 inch shims on both sides) now that trans is in the xmember sits towards the pass...