Search results for query: *

Thank you! Ad modified.

This is a factory vehicle Certicard & holder. I'm told it's from a 67 Belvedere/Satellite. It's in fair to good condition. The holder has one stud missing. You can mount "as is" or use two sided emblem tape. Located in Savannah, GA I need to get $20 shipped (in the US) Thanks for looking!

I have a set of used door hinges from a 67 Coronet two door. Although the doors worked correctly when I parted it out, I am selling these as rebuildable cores for $15 plus the ride. Located In savannah, GA. Thanks for looking!

I have one water pump pulley left for slant six. It is the 2 groove ac pulley. I don't remember if the PS was driven off the AC or off the crankshaft pulley. Hope this helps

I had two sets of twin pulleys (ac & PS I think) I believe they were both sold at the last swap meet. I'll look tomorrow. Thanks!

The "Demon" door emblem has been sold. I could do that for the rest.

I have a nice used dealer certicard and two holders. one holder has all the white embossed print still on the envelope. It is missing one mount stud. The second holder has all of the mounting studs but the white print was removed when we cleaned it. The metal card looks pretty nice. See pics...

OK! today we add some emblems to the mix! I have the individual D A R T letters from a late 60's car. One stud on the "A" is gone ($5 for all 4), a very nice "Belvedere II" Glove box door emblem from a 66-67, "Duster", "Plymouth" two flat "DART" emblems ( one broken but repairable) and the...

yes. it is sold. sorry.

Sale pending on van oil filler. 6 cyl balancer & pulley sold, still have one set of /6 ac pulleys Here's some more stuff to add to the pile: We have a vacuum pod for mid 70's A body,2 more rubber shift fork boots, a big block 4 groove lower pulley, 2 more neutral safety switch wires, An...

Just emptied out inbox. That wlll fit in the padded flat rate envelope for $8. PM for email address. Thanks!

proportioning valve #3 and the washer pump are sold. Thanks!

Sale pending on all of the power steering pumps

Here's some MORE stuff: I have 5 brake proportioning valves (some people just call them T blocks) They are for A/B body with drum brakes. 4 have been cleaned and polished, one has not. A STEAL at $5 each! Window washer manual foot pump, truck/van oil filler cap, several battery box legs, a...

OK so we have sales pending on the distributor hold downs, the small block coil bracket, and the shift fork boot. 2of the steering column brackets are sold. Also another sale pending on the defroster hose.

Cleaning out the garage getting ready for the FMA show in Ocala this weekend. Here's the first table full of $5 each stuff. Scroll to the bottom! I keep adding more! OK so far. we've got a body steering column holdup brackets, a length of defrost hose, rubber shift fork boot, two body tow hooks...

Still trying to get better pics. These were done just as the sun was going down with sky background (no trees). There really is virtually no pitting.

Thanks for the question (since it should have been in the description) I do NOT have the inner clip. The outer nut came from another mirror I had. I have never had it mounted but the adjuster lever moves freely

Sorry for the limitations of photography. the top 5 pics are in bright sunlight. the lower ones in the shade. Basically it's just a huge reflective surface either way.

PRICE LOWERED TO $50! This is one of the nicer used mirrors than I've ever found. The chrome is in very good condition. I've tried to take pics both in the sunlight and under the porch. I cannot tell if this is a repro. It has a Mopar part number that says it's for a 69-71 Chrysler. It is...

I was about to take in my scrap aluminum to get some money up for the Carlisle space rent (due in a week) and I came across these headlight bezels. I was going to toss them on the pile but I noticed that they are in pretty good condition. Since the price of aluminum is about 35 cents a pound, I...

I'm cleaning out the garage & sheds to get up money for Carlisle spots (Due Oct 15th). This is a box of A and B body mirrors and parts that I've been carrying around. I count 11 interior mirrors and 6 left side remotes and one brand x. Some are rusty, a couple have the glass broken or missing...

This is a set of tail light sockets & lenses from a 74 Scamp. The lenses have some heat cracking but they should still work on a driver. There is some primer overspray (see pics) that I couldn't get off. The sockets have been loosened up and they move freely but they have nt been electrically...

It's not an A body but I picked up a new sealed package front license mounting kit recently. Mopar part #55156799AA is listed for the 05-10 Jeep Grand Cherokees, it could probably be adapted to other uses. Great if your state requires a front plate! Located in Savanah GA, $20 plus the ride which...

This is the driver's side fresh air vent from a 67 Dodge Dart. It has the little door that opens to let in air. As you know, the hinges tend to rust and lock up the door. This one was repaired. The hinge rivets were drilled off, the door hinge was wire wheeled, painted and lubed and the door was...

Thanks!

Cleaning out the garage, might be more posted here.

All of my Ebay parts are now marked best offer. If you don't like buying on Ebay, I will sell you the part OFF Ebay. here is a list of what is for sale...

Here's a set of windshield trim retainers for the lower windshield molding on a 66-70 B body (came off of a 66 Satellite) Mopar 66-70 Plymouth Dodge B Body Lower Windshield Trim Molding Retainers | eBay Thanks for looking!

I have a pretty workable 75 Valiant rear tail panel on Ebay for $50 plus the ride.. Can also sell off ebay if you prefer. Mopar 75 Plymouth Valiant Chrome Tail Panel Trim | eBay Thanks for looking!