Search results for query: *

Which engine? Slant or small block???

Here's a lead... http://www.car-part.com/cgi-bin/search.cgi Sorry the link don't work, but there is a yard in Terryville?, CT that has a pair...

Got a crank pulley???

Are the parts store mounts too wide for the driver's side???

PM sent...

If you're wanting the motor mount brackets, I've got both of them still bolted to a 198 that came out of a '71 Dart. They're a little greasy and the rubber mounts are starting to separate. Want the bolts too? LMK by PM...

If the center register on the new axles is the same as the register on the old axles, all you would need to do is drill your old drums for BBP and use your current brakes. Plan on finding backing plates, brake parts, and drums from '65 up B, C, or ANY '73 or newer rear wheel drive Mopar with 10...

Kinda like this... Mopar Small Block 273 318 340 Alternator Brackets 64 65 66 67 68 69 | eBay

At last, the real deal from a '77 and been sitting on a shelf since '88. $30 shipped to your door and the grunge is free... Slant Six Valve Cover 225 Super Six 6 Cylinder Mopar Leaning Tower of Power | eBay

And the missing link Mopar Engine Valve Cover Chrome Bolts PCV Breather Grommets “Slant 6” 1970 | eBay Hope this helps...

Will this work? http://www.ebay.com/itm/Engine-Valve-Cover-Individual-Spectre-5244-/251552229612?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1975|Make%3ADodge|Model%3ADart|Submodel%3ABase|Engine+-+Liter_Display%3A3.7L&hash=item3a91ae68ec&vxp=mtr...

Which bolts do you need? The ones that mount the caliper to the spindle or the ones that hold the caliper together? Judging from your question you are looking for a GM style caliper pin. The caliper on the car didn't use such things, the pads were held in by the anti-rattle clips available at...

Take the backs off the seats so they will fit in a couple boxes and find a box for the fender, Greyhound will ship everything for you...

Found one in a '68 Fury. It's been through a derby or 2 but it still runs. Thanks for the PMs...

Have truck will travel (at least a little ways). Looking for a 273 within 200 miles of Cincy, OH. Only need a block that will clean up with a max overbore of .050", so if that's all you have, let's talk. If you have a complete engine but want it gone, let's talk. Wanting to make a non...

Which bellhousing did you want? 10" or 11"? Brewers Performance has both and your choice of billet or stock cast bearing retainer in both bolt spacings. May want to check them out....

Found a couple for you to check out. the_fatman has a '79 and is in Celina, OH just off I75 @ Wapakoneta. adamparrish123 has a '73. He is off I77 south of I70 close to Zanesville. If the engine is a '68 or newer you can bolt up your flexplate and transmission regardless of whether the engine...

You can get a repop from Brewer's Performance if you are so inclined. It's fiberglass, but it's also less than a C note.....

Something that jumps up on the fence at night and goes "Meeeooow" until you throw something at it....

Clutch type can be rebuilt when the friction material wears out for the cost of new clutches and steels. Cone type can be rebuilt but is an involved process that costs almost as much a new one....

Nite Moves, I'll be happy to forward parts to you. My picture isn't hanging on the wall in the Post Office so I have no problem going there.....

Subscribing for future reference....

There is a Fox body Mustang just down the road from me that is already a drag car. It's a roller and is for sale at $1000. Located just outside Chillicothe, Ohio. If you're interested PM me and I will go check it out and get you the contact info.

Try your local automotive machine shops. You'd be amazed what people abandon and the shop is more than happy to get rid of.......

Sorry about the confusion guys. Had a 1am brain cramp and put out some bad information. I was wrong on this one, should have said "The steering linkage will swap if you use the same steering box from the non spool K member". I think we can all agree there is no difference between a slant and V8...

You will, however, need the steering gear from the car that donated the spool K member. Grab the steering box, the Pitman arm, the idler arm, center link, and tie rod ends. The '71 parts won't bolt to the '73 up K member.

Sent you a PM.

Sheesh, that didn't take long. Have an engine lined up and I pick it up next week. Thanks FABO.

Like the title says, I am looking for a 170 slant block. If you have one that has been overbored to the max, has a cylinder that is too scarred up to fix, or you're just tired of tripping over it and you don't want to junk it, give me a shout. Just need the block with all the main caps intact...

Still need an alternator? Got one off a '70 1 ton truck if you can use it.