Search results for query: *

Likely a 400, not 440 in 74, just saying.

I have a 340 runs pump gas and my power band is 700 rpm higher than your chart. My car is stock 3.53 and I can cruse 70 in it but not 80. I wouldn’t recommend 4.11 on the freeway for any distance.

If you look at a rotisserie you will see the two posts tied together. You would need to do something to prevent the engine stands from drifting apart.

I really don't like to buff cars as it is a tedious job and if you make a mistake you screw up the paint job. The reason he asked about metallic is that this makes it all the more difficult because if you sand too much you get into the metallic and screw up the paint job, If it is metallic you...

I'll go $50 for this item if that's OK, at least get things started. Sorry, didnt read far enough, o;d fart syndrone!

Very nice looking installation, I didn't want to cut floor but sure looks like you did a nice job and I appreciate the information, I don't move too fast!

Thanks folks, I am fabricating my ties now so really no pics yet, I will post some in a few days when I get the ties assembled. I likely went a bit overboard as I picked up some 2" x 3" steel tube, couple of 4' long pieces from the local supplier. I am cutting the top off the rear and sliding...

Folks - I need to tap into the collective wisdom of this site for my project. I am putting together a 70 swinger with a 340 and four speed, originally a 198 /6 and 3 on the tree. I have fabricated some frame ties with supplies from the local steel shop and as I prepare to install them I see...

Any of those parts available for your mopar brothers?

You asked, this is mine and it is in my garage - more proof that god really loves me! Merry Christmas.

Sorry I missed you at this event, so much to see, so little time. I am in the greater minneapolis area, are you near? I could still use that panel for our dart project. Mark

I got there at around 1:30, wife was with me. Brand new motor running through help of this group. Speedo doesn't seem accurate so don't know , but tack was at 4 following traffic for most of the ride, supposed to be 3:55's with 15's 60 series. Went to get into the challenger run and they...

I could use that panel, trying to get to Farmington, car is not cooperating, but day is not over.

Women have sex to get married and men get married to have sex! Also, be careful picking a fight with an old guy, if he is too old to fight he might just kill you. my 2 cents

I've got an old tire I'll let you have!

I need a grille assembly if you have a whole one with trim. I have a 67 coronet conv. and can't find a grille.

Dittos on the 70/71 dart/demon grill assembly!

I have been painting cars for a long time, first as a professional and now as a hobbyist. You have heard from other guys here who also know what they are doing and it is my thought that painting cars with the modern colors is not something approached without careful consideration. Painting all...

I wanted to say thanks to Abodyjoe for the service manual. recently downloaded 1970 dart/challenger manual, what a piece of treasure. Joe if you are out there somewhere I am beholding to you. Much appreciated.