Search results for query: *

George Jets. I really didnt want to buy a whole kit and break it up just for 2 of these. My local stores only have them in steel. Tsully, if you can spare a couple let me know, and I can send you PayPal.

Looking for two 1&5/8" brass freeze plugs. Located in west Texas Thanks Matt

Get with Cosgig he has a bunch of these he dragged out of somebodies yard.

Do you need the whole thing, or just the area where the Nader pin bolts to.

Grumpyb is it a goodmark panel?

Thanks brother!! I may get out there tomorrow for just a little bit. Yes AMD also leaves a bit to be desired as well, but fits much better than Goodmark. Everything going into this thing is either OEM used or AMD. The only pieces I have that are goodmark are the quarter skins. I knew they would...

Yep they are rough. Even the stamped hole for the fuel filler is off about 3/16" I will have to make a plug for the center hole, and fill in the screw holes, then move them over and drill/cut them back out. On hiatus from working it. Hernia surgery about 14 days ago. Still have to finish...

I bought a pair of them from getallparts for $300 shipped to my doorstep a few years ago. If you ordered a goodmark from summit, try these folks, get the same part for about $180 plus shipping. Cancel your summit order. No brainers. Unless you ordered the AMD one, and got to have it. Check out...

Www.getallparts.com It's a goodmark skin. Visit my build thread 67/68/69 cuda dilemma The last few pages to see how to section in a goodmark skin. It's not for the faint of heart. A whole lot of making it fit. If I had the cash, I woulda just bought AMDs.

You can find them stainless capped lug nuts at rock auto. They are junk lug nuts IMHO. Just get chrome plated ones.

Any M body fifth ave will have one up through 1989. Get the pushbutton in the glovebox too.

Should be the same rail from 64-73. I think 74 up they changed spacing of the bumper mounts.

Looking for PN# 3743859 A833 OD trans aluminum bellhousing. Located in Abilene, Tx. All threaded holes need to be decent shape. Thanks Matt

Only differences I have seen on the 68-69 318 to 340 VCs is a clamp type bracket on the 340s on the RH one in the valley side. This would be an easy piece to duplicate out of thin gage steel flat stock, and weld on IMHO. Not my valve covers in pic, but notice the RH cover. The bracket on the...

I have a pair of 69s. Not willing to split these up. All clean and ready to go. Baffles were removed to thoroughly clean them, then welded back in. The 68s in orange are what you have. PM me if interested.

That's a nice rear.

Thanks Clementine , I dont have anymore of these. If I get enough firm orders for these, I will do more of them. Heres pix of what these look like. I dont have any more of them right now. Holes are slotted to accommodate mopar 3" axles and ford 8.8 swap 3&1/8" axles

Try sedanman here on fabo

I got one. Thanks Al

Ok thanks

Wanted 68-69 cuda coupe window regulator roller assy. This is the bolt on roller piece that bolts onto the die cast regulator piece for the quarter window. Need the bolt on one that the small rollers are not frozen. Tight turning is ok, I can free them up. I broke this one trying to unstick...

You can also look for the reverse lenses for 62 valiant. Same lens and socket. Different housing

I already mentioned 80s M body RWD fifth ave 1984-1989. These cars its electric inside release, and also allows use of a key from the outside. Not sure what else you want? $10 junkyard trip. Direct bolt on. Get the wiring and glove box button.

All chrysler fifth ave M body RWD cars had them. Latch bolts right up. Junkyard $10

They made several shaft sizes thru the years for multiple switches. Theres a 2 speed, 3 speed, and variable speed.

Yes. Both cars are non A/C but for $100 I went with tinted windshields. It's nice having that anti glare dark strip at the top. It's waaay better than nothing. Unless the car is an exact nut and bolt restoration, who cares. In fact the tinted glass with low glare dark tinted at the top is better...

Tinted glass made by FY auto glass. It's currently tucked up in my loft. Too hot to climb around up there. Chinese plant in Dayton Ohio. It used to be old an GM plant that was shuttered in 2008. They opened it back up.

Local glass place in Abilene Tx. I got a friend who works for them. Another friend needed a glass for a 72 scamp. So we went and bought 3 windshields for $100 each. Lol

Wow that's wierd, it's the same glass 2 door hardtop from 67-76. Pretty common glass. I bought 2 of em maybe a year ago. One for each barracuda for $100 each plus tax.

Check w tqfastfish in parts cars section. He is parting a 68 barracuda fast back and it has power brakes still in it. Should be one of the top entries on the first page. Hope this helps Matt