Search results for query: *

From the '68 Barracuda * bumper jack base * ratchet - lift mechanism * tire iron shipped anywhere in the lower 48 states $75.00 pay pal or MO if pay pal please cover the fee thanks

Sold

New Old Stock Mopar, never installed. For a 742 differential. 2.76 ratio Will ship in a medium usps flat rate box. I have the original Mopar box. It would cost more to ship in that. If the buyer wants the oe packaging I will fold and fit it in the medium flat rate box. $15.00 + 17.10 = $32.10...

New, never installed, not sure why I even have it More Information for STANDARD MOTOR PRODUCTS EGV490 $25.00 shipped in a medium flat rate box Said to fit v6 and v8 88 to 92 Dodge pick up trucks, vans check the rock auto listing for a complete list of applicatons

all three of the 33 tooth speedometer gears are sold

Speedometer Gears See photo for tooth count and color $22.00 each shipped in a USPS small flat rate box. Pay pal or MO Combine parts and save.

the date code on the front section is Feb 67 the date code on the rear section is Nov 66 the numbers stamped by the stud are 1 5 3 2612538 67 My 68 Barracuda is an early one, built October of 1967

No its a custom made piece, the adapter is 1/4 in thick,, more than twice as thick as the block saver on a QT blow proof bell

sale pending

The adapter was made in a precision machine shop to fit a Mopar 130 tooth flywheel and SB bell housing to a slant six crankcase. That would allow the use of Mopar SB performance clutches and pressure plates to be used with the slant six motor, in place of the normally weak stock slant six clutch...

This is a Mopar SB to an A-833 Quick Time Bell Housing. Purchased in 2013 and never installed, has been in inside storage, still in the original box Today Summitt gets 941.95 for this bell housing. Buy this one for $725.00 shipped to the lower 48 states. Discount for local pick up. Pay pal or MO

Never installed 440 Source 130 tooth steel billet MOPAR SB flywheel Bought and never installed, still in the original box 440 Source has these for 199.99 + shipping. buy this one for $200.00 shipped to the lower 48 states pay pal or MO savings with local pick up in Indy

This is the OE alternator from the 1968 Barracuda. It was removed from the car years ago and has been in inside storage. 1967 Date code on the housing, does not look like it was ever rebuilt-sandblasted. will ship in a large USPS flat rate box, that is 22.80 How about $25.00 shipped savings...

Three new Endurotec GSAP21OE slant six head gaskets. These have the 3.6 diameter fire ring All three $145.00 shipped to the lower 48 states Pay Pal or MO Discount to remove shipping cost with local pick up in Indy

set of 3 Slant Six Steel Shim Head Gaskets, new never installed Mopar part number 2843182 all 3 shipped to the lower 48 states $105.00 Pay Pal or MO price discount to remove shipping cost for local pick up in Indy

Set of two KB 239 1.0MM OS pistons. These 2.2L pistons are sold in a set of 4, I used two sets of 4 to get to the six needed for my slant six build. These are the two remaining. Two pistons, two piston pins, four piston pin retaining circlips, two complete sets of rings. The top rings are Moly...

Set of six 198 rods. Re sized, new bolts, clean and ready to install. $250.00 plus shipping MO or Pay Pay, if Pay Pal the buyer pays the fees

sale pending

New low price

New LOW price $50.00 shipped or best offer Cast Aluminum 1bbl slant six intake. Use this light weight one piece cast aluminum intake to replace your existing heavy cast iron intake. or This cast aluminum intake would be an excellent candidate for applying fabrication and welding expertise to...

I have this same model throttle body on the built slant six in the 68 Barracuda. it is very tunable and drivable. The throttle body is used on 2002 GM 4.3 L v6 motors.The same size TB was also used on GM 5.0L v8's of that same era. The TB was disassembled, cleaned and polished internally by a...

Cast Aluminum 1bbl slant six intake. Use this light weight one piece cast aluminum intake to replace your existing heavy cast iron intake. or This cast aluminum intake would be an excellent candidate for applying fabrication and welding expertise to make a cast aluminum 2 bbl Super Six...

New Comp 901 Valve Springs and retainers, these are the '340' valve springs. This is a full set of 16 valve springs and 16 retainers The box says the parts are Made in the USA. The springs-retainers and the box are in new condition. $140.00 shipped with tracking for the springs and retainers...

the parts are spoken for, thanks for the interest.

Power steering box and pump out of the 68 Barracuda, seemed to work fine, but I did not drive the car much before these were removed. They have been in inside garage storage the last 10 years. Free for local pick up in Indianapolis 46220. If shipped will charge actual postage and $10.00 for...

11/2/22 update, set 1 is sold special offer: buy set 2 and get set 3 for free See photo, set 1 and 2 include: motor, slant six mounting bracket, belt and water pump hub,,, these are $27.00 each plus shipping, will ship in a USPS flat rate box, current USPS price is $17.05 set 3 includes...

For someone that knows how to weld aluminum, those one piece cast aluminum slant six intakes are excellent manifolds to make into Super Six intakes. Fabricate a two bbl carb mount, cut off the existing one bbl mount and weld on the fabbed 2 bbl mount. Super Six and one bbl intakes all have the...

Bought these a few years ago, never installed. They got set buried back on a shelf and I have no plans for them now. $85.00 shipped to the 48 states. will take off shipping cost with local pick up in Indy Dual Valve Springs: 1.437" O.D. Outer, .697" I.D. Inner-1 (compcams.com)

made room in my In box and I will PM you

It’s free, do a road trip.