Search results for query: *

So what I am seeing is that my car being a a/c car it should have c18 plugged to the fan switch and c41 plug is not used ? At this time c41 is plugged in and c18 is not.

That's what I thought it was, But all the switches for the heater & a/c controls are all plug up and after cleaning the blower motor fan switch everything is working. The plug looks the same as what plugs into the fan switch except the ones to the switch is green & tan. I wonder if their a...

Removed Cluster to work on fan motor switch and found this connector not plugged into anything. It has four wires red with tracer and black with tracer goes to one plug dark green to the second one and brown to last one . This is 73 Duster with a/c I have looked a few wiring diagrams and don't...

Thank you . That's what I needed. Now i need to find where the other plug goes

I was just looking at your photo and I would like to know where the connector above your hand and to right that has a small piece of tape wrapped around it about two inches above the three plug connector.

What color are the wires that plug into fan switch. I know where the long connector hooks to a/c and heater switch. On my car I have two three plug connector that could hook on to the fan switch one has red ,black,tan,green the other has four green and tan wires.My car has a/c also

Yea, I have tried that and have not found one that shows a very good wiring digram of the heater and A/C wiring. I guess I will order a factory service manual and see if there a better wiring digram in it. Thanks for your input

The plug on the heater box on the passenger side is already plugged in and it brown and green wires. Is there a resistor up close to fan switch ?

I have a 73 Duster that I just purchase and the heater blower would not work. I pulled instrument cluster to get the wiring and there is two plugs that looks like it would plug into the fan switch . One plug has red, black, green, brown and seems to be coming from main harness and has power with...

Not to high jack your post, but I am trying to get my heater blower working on my 73 duster. I see two plug that looks as they would plug on the fan switch. Which one plugs on the fan switch and where second one plugs into.

Tape 2 d cell batteries together and attach wire to each end and that will your test voltage 3 volts ,gauges will read about half.