Search results for query: *

  1. slant six

    Source for master cylinder to Prop valve pre bent lines?

    Thanks folks lot of options there I will take a look around and see what I can come up with.
  3. slant six

    Source for master cylinder to Prop valve pre bent lines?

    Hello All, Where is a good source to find master cylinder to prop valve pre bent lines for a '69 dart with factory front discs? I want to avoild bending and flaring my own parys up if possible. Thanks
  4. slant six

    KH brake help

    Grease Gun and C clamp is all you need along wit a bit of common sense :) 20221210_114001 by Hyperpack, on Flickr 20221210_114006 by Hyperpack, on Flickr 20221210_114010 by Hyperpack, on Flickr Turn that mess into one of these: 20221223_194617 by Hyperpack, on Flickr Then one of these...
  5. slant six

    Reasonably priced BIG BRAKE alternative that fits in a 15” wheel

    Nice work, Do you have any drawings or CAD Files of the brackets to share? I can Help Make them into a CAD File with dimensions if you give me a full-size paper tracing of your brackets. I am not sure if you want to share the intellectual property you have created or not. Disclaimer: I am...
  6. slant six

    Rotors available (for now) for K-H disc brake cars

    Invest in your local machinist to correct those goofy castings.
  8. slant six

    Rotors available (for now) for K-H disc brake cars

    I used these with no issues.. StopTech 127.63005L StopTech Drilled and Slotted Brake Rotors | Summit Racing StopTech 127.63005R StopTech Drilled and Slotted Brake Rotors | Summit Racing I put a set of EBC Yellows on with them and they have been good so far. Research the part #'s and see if...
  9. slant six

    Wheel Seals / Bearings Races etc for the Stock KH Disc Hubs

    Thanks!
  10. slant six

    Wheel Seals / Bearings Races etc for the Stock KH Disc Hubs

    Splash Shields? for KH Front Brakes Are the splash shields available or Just nos / used? I need a left one only - Any hope that they swap with the KH mustang splash shields?
  11. slant six

    Dr Diff FORD rear disc brakes....What replacement pads have you tried?

    I have The Cobra Rotors on the rear of my '64 Dart. have not replaced the pads (stock from Cass / Dr.Diff) in ~20,000 Miles of spirited mountain corner carving , autoX, trailer towing and 1 Track Day session. I am going to try EBC Yellow Stuff for the rears next. We have Run those for 8 hours...
  12. slant six

    Brake pedal height question

    Good Question John, I have the Same issue in Grune Holle.. Pedal is low compared to any stock Mopar stuff.
  14. slant six

    Wheel Seals / Bearings Races etc for the Stock KH Disc Hubs

    I just bought 8 New Pistons and 2 Seal Kits From RockAuto. Once I popped out the Frozen Pistons out of the calipers it seems that I actually could have tried to clean a few up and reuse them, but since 8 new ones were available I bought them!
  15. slant six

    Wheel Seals / Bearings Races etc for the Stock KH Disc Hubs

    Great, Thank you very much!
  16. slant six

    Wheel Seals / Bearings Races etc for the Stock KH Disc Hubs

    Hello, I am looking to Refurbish Some KH Hubs for a project that I am keeping the SBP 5 on 4" pattern on. Are the Seals, bearings and races all the same as the 10" Front Brakes for this application? I cannot find any listing for these parts on Rockauto. If the parts are not the same can...
Back
Top