Search results for query: *

67Dart273, very possible about the Tender gone bad. I fully charged the battery (13.5V), and before I connected the positive battery cable took one last look at the terminal ends. Seems the positive end has a small crack in it, so I replaced it. Per your instructions above, I connected positive...

@ Inertia, I cleaned both battery posts, and corresponding cable ends 2 weeks ago, and they are still clean (see 1st post). Battery took a charge, took it to local parts chain, and had it load tested. It checked out good. I removed the Battery Tender terminal from positive cable end, and...

Sorry guys, I forgot to mention that the car also has a MP electronic conversion kit installed on it as well. @ Bad Sport, I've got a regular (10A) charger on the battery now, w/o the battery cables. We'll see what ensues when I get it fully charged. I think you are correct, in part, about a...

68gtxman, Thanks for the quick replay! V @ battery is 13.5 (initial flash of 13.5 when probes contact posts), then immediately jumps down to 7.90 V! I though that was weird! I'm starting to think my Battery Tender is the culprit. Before this post, I had cleaned up the grounding strap locations...

The essentials: 1967 Barracuda FB, 273, floor shift A/T, Factory AC. Electric fuel pump, w/relay, & Battery Tender, are installed at the battery. The story: Every week, regardless of weather, I start, and let warm up my car. Gives me a chance to spend some quality time in the garage, with a...

IIRC, the police alternator was rated at 75 amps. Hopefully someone can confirm this?

If I'm not mistaken, 1157 is the only bulb that should be used. Just my opinion.

Thought i saw somewhere that Flaming River had a disconnect type switch, that had some type of "memory" on it (battery?). Maybe someone else could confirm/deny?

LOL... I've seen a couple of members on here that have painted those two areas with flat black, and that seems to blend in pretty well. I just thought of a different way to utilize that area of the valance. Besides, my valance isn't in the best of shape. Cudamark, your most likely correct about...

O.K., so this is what I had in mind. The contour of the T/S lens is almost a perfect match to the contour of the lower valance. The valance will require some modification though, since the lens is taller than the sheet metal there. Also, the metal has a slight angle that would point the T/S...

Thanks Oklacarcollecto! I'm going to head out to the garage on Saturday, and tape it into place to see how it would fit. If it looks o.k. to me, I'll post it here to see what you all think. Cudamark, if the lens looks like it will fit, I'll definetly get back with you on the housing/assembly...

Oklacarcolleto, you and Cudamark have helped out ENORMOUSLY!! Can't thank you guys enough! Wishing you some pain free days ahead. I had an idea of installing some type of T/S, on the lower valance of my Barracuda (in each corner, where the sheet metal kinda matches the contour of the T/S lens...

Oklacarcollecto and Cudamark, you guys rock!! :rock:

You guys are terrific! I was just about to post the pics of it when I read your posts! Thanks a million Oklacarcollecto and Cudamark for the info! Man, I love this place! FABO is the best! BTW Oklacarcollecto and cudamark, Yes, the amber lens is the one I bought. Am looking to do some...

Bought this T/S lens @ a swap meet, and was wondering if anyone knows what car it is from. Don't have a pic yet, will upload one tomorrow. #'s on it are:2930387 LT.-AMBER 2930679 LT.-CLEAR I believe it's from a '69 dodge? Thanks for any info on this.

According to my service bulletin, it says 1073's. Of course, the service bulletin is dated 9/25/66, for the new release of the 67 Barracuda. Others might know as well......

Looks terrific, Tony!! Thanks for the link. Going to do the swap in the spring! Did you replace all of the 194's in the dash with the LED's?

Don't know how well this will turn out, but I hope it helps. Pic is from my 9/25/66 Service bulletin for the '67 Barracuda's. According to the brochure I have, the 2 speed wiper system was standard and the variable speed was an option.

Neat! I'll have to keep my eye on this. Thanks for sharing!

Very nice!!

I've always bought mine from Sears. Also been using a Battery Tender for the last 2 years. Helps when you only drive it occasionally.

The fact that you have an 800 cfm carb, on what sounds like a mild 318, seems a bit too much to me. Just my opinion though, doesn't mean a thing. Can you tell us more about the engine, or did you just add the cam?

Thanks for the reply. It definately gives me a direction to go in.

After alot of reading on this site about electrical/gage/dash problems, I decided to do some work on my car. The car-'67 barracuda with dealer added a/c, 273 4v engine, complete fuel system replaced 10 yrs. ago (gas tank w/sump, electric pump, chrysler sending unit, all fuel lines, regulator...

Nice looking unit you've got there!!