Search results for query: *

Alot of good ideas here. I think I will take some paint stripper and remove all the paint in the problem area and then look at my choices. The area in question is only about 3 to 4" sq. so we are not talking a big problem here( I don't think ).

On my rockers and on the front inside door openings I have some small holes and pin holes. I could just run some bondo over them that would last for a little while but I was wondering if there is a epoxy or something that might be more permanent. Anyone ever tried or found something that works?

Yup, that's it. I'm assuming yours was chrome also and you painted it?

The '75 Duster I have as a donor car came with a radio delete on it and the factory plug looks like the standard chrome antenna bezel on the outside then there is a round black rubber or plastic ring then on the inside diameter there is a small chrome circle with a chrome 5/16" bolt head. I'm...

There are companies that supply the original type of paint used by the factory on the grills. Several years ago I bought some grille paint and stock ralley wheel paint from a company in PA. It was called argent something or other if I remember right, I will see if I can find their info.

Well I actually took the front bumper off the 75 and put it in front of the 73 and it looked like their was no way it would go. Now I know the sheet metal on my 73 was replaced at one time and maybe it is 70 t0 72 parts. The grille and hood are definetly 73. Any thoughts?

What I did on my 73 Duster340 was painted the parts on the bumper that were in bad shape. It came out amazingly good and I have had some fun with it because when I show people they can't believe it's painted. For example lets take the front bumper which was rusty on most of the flat surface on...

When you say panel are you talking about the piece between the tail lights?

Can anyone tell me if there is a way to swap a 75 Duster bumper with a 73 Duster? The bolt holes etc. are different on the 75 because of the 5 mph bumper set up but I didn't know if there is some way around this with bracket changes or modifications. Also, will a 73 Dart bumper fit a Duster of...

ButterDuster, Did your article say what % FY1 lemon twist Dusters were produced? Thanks

Thanks, that would be great. A friend of mine has all the tools you mentioned so the pictures would help figure it all out.

thanks guys, good info. My 73 Duster quarters are loaded with bondo so the rear panel replacement will be the way to go. The 75 Duster I bought for parts was from Arizona and as it turns is amazingly solid even though it endured some New England winters. The only rust on the lower quarters is...

Do any of you body men out there have any tips on repairing the traditional rusted section on the bottom of duster quarter panels. Does anyone make a small weld on section that works?

I believe they only came on the 72 Demon and the 73 Dart sport and that they are the same. I just mounted one on my 73 Duster and it looks awesome, the flat hood on the 73 is perfect for this scoop. For install info find 7Demon2's thread that tells it all, using his info I installed mine last...

I need a part off your 73 door window set up. It is a small bracket that holds the white nylon roller the attaches the window to the door track. Can you help me?

After looking at my hood I think the hole they used was one of the holes for the insulation pad. Using this hole as a guide would probably locate the hood scoop to far forward but I'm sure it would look O.K. I think I will stick with 72 Demons specs since he has the original mounted scoop from...

Wow! Great info, this is exactly what I have been looking for. My scoop will be mounted by tomorrow night. Thanks

Hoping someone can give me the real scoop on the snorkel hood scoop placement and install. My factory snorkel scoop which I just bought on e-bay for $250 with the shipping should be in any day now and I want to install it on my 73 Duster 340. The ad said it came off a 73 Duster but after reading...