Search results for query: *

Rans Stratus XP XL Recumbent Bike (Blue) | eBay not the one I have but simular $900 ish but if you look around you can find a used one cheaper. 26" 48V 1000W/1500W Electric Bicycle Front/Rear Wheel Ebike Motor Conversion Kit | eBay 1500 watt rear wheel $260 48V...

Here is something I put together.

An Ozone generator could get rid of the musty smell, wont do anything for the moisture but it would take care of the smell.

Is that the seal that was eaten almost immediately by a killer whale ?

I think if you look around you can pick up used solar pool panels really cheap. That being said I was thinking of running the water through 4" corrugated drainage pipe. I think 100 ' will cost you around $60, its it already black just coil it in a big circle and put it on the roof. with...

you could run a helicoil

Don't expect really good results without gas, but this is true with any welder. I have seen some people that can do it without ges but it isn't easy.

Breaker Bar : self explanatory, Used to break off that stud that has a stuck nut on it.

Put a weak battery in the harbor freight meter and try it again. You may be surprised.

Maybe your should seal the wood before you use it.

Just buy a shipping container and be done with it. I think you can pick one up for less than 3k

True but this is how landfills get full.

I had one that needed the commutator and brushes cleaned, you can try that. once they get gummed up they loose a lot of energy. Of course the one I had had a DC motor with brushes.

Would you believe a bluetooth toothbrush ?

Replace your florescents and get rid of your ballasts for about $6 a bulb Light Bulbs from the Web's #1 Lighting Retailer | 1000Bulbs.com

wow lights and tanning booth all in one

CHeck these out , if you already have the fixture , LED Tube Price Break | 1000Bulbs.com or if you dont Shop Light Fixtures | 1000Bulbs.com but if you really want to go cheap this is $23 Hampton Bay 6-Light Chrome Flushmount Raceway Bath Bar Light-EW556CH - The Home Depot and you can...

I would build my own, look for a 12 volt led lights shop by lumens I don't trust watts, get a small car battery or lawn mower, and possibly a solar charger for it. good luck

Match the current use and I think you will be close regardless of what the HP says. Of course bigger is better :)

Sound like the guy in the video has a few extra motors send him an email :)

A lot of motors measure the HP based on the amount of wattage that the motor draws, which says nothing of the efficiency of the motor output. So for each 745 watts the motors claims to be a 1 HP.

did you see this http://www.forabodiesonly.com/mopar/showthread.php?t=325652

I think you need to eat the 5 days.

powdercoat ? I guess the real issue getting a smooth enough surface underneath. I have had a few antique items refinished by a local expert, but I dont remember the cost.

This one looks pretty good http://www.northerntool.com/shop/tools/product_200577654_200577654 39" 6000 lb portable $2039

Goop dispenser, Just add a little water to thin it out. scoop it into a ziplock bag and cut a corner out of the bag then squeeze it into an old shampoo bottle.

Put heavy oil in each cylinder and turn the engine Consider removing the valve covers and loosening the valve train so that all of the valves are closed. And while you are in there make sure everything has a good coat of heavy oil. Brushing on some 90 weight wouldn't hurt. Close it back...

they weren't super bees were they, I hear they eat big block :)

I bought a cheap one and it works fine, but it only reads engine codes not brake or transmission or seat or whatever else there is. Sooo instead of buy an expensive scanner I just drive to discount auto or autozone, they are more than happy to let me borrow their more comprehensive one for free.

Are you sure that is made in the US :) Or is it just assembled here :)