Search results for query: *

Yes, Body style changes have nothing to do with spline counts.. if we really need to be technical it's 96.5 year change.. so easier to say 96 vs saying look for this month over that.

It's on the other side of the car attached to the damn ashtray, like it should be!!

Real roadrunner but no vin tag .

Not much left of that one.............at least it is 2k and not 20k

https://www.facebook.com/marketplace/item/1829783224156488/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A448d93bc-f9cc-4127-842a-87766a45aa4f

I would also agree with the metal carport idea. It'll withstand our Midwest weather way better than a canvas shelter

:rofl::rofl::rofl:

First off we need we need to clarify the intended purpose of the fuses in a circuit. Fuses are there to protect the wiring in case of a short not the "components" in that circuit. That is why you want the fuse to be close to the power source. If you put the fuse close to the component and have...

Sorry don't have any brand name, but check your local area for metal carports.

If you have trouble finding the flasher , have Eric show you ...:poke::poke:

...arm only adds to this problem. Offset Lifter: The offset lifter comes from Smallblock Chevy Land and in my opinion--CANNOT ever be used in a 59* degree SBM. Why? A SBC can get away with it for much longer because the lifter bore is parallel with the pushrod and cylinder bank. I believe it...

How is ground clearance? Is this a pan that would fit an A-body? Thank you.

I agree, and this is the right way, especially when dealing with non-OEM components..... Some people may need to be reminded to go slowly as you approach your goal tho.

:rofl:

:rofl:

Not to bright , and like Hoppy said led flasher is a must.

Until it leaks

not too bright? i see some and it's just crazy.. will order some next week.. not sure if i need orange or clear for the front, haven't seen the front lights in like 2 years now

This is what I used for Brake light.

It's Falcon Friday! Good morning :D

Agree with Scat

have not seen that before

A clean out plug at the bottom of the trap. Brilliant.

they are pretty cheap, no need to go out of your way.. plan for this weekend is to get the heater motor out, clean the heater box.. take the motor apart and clean/lube it up.. it sounds unhappy after 50 years of sitting, it still works though.. Gonna roll the dice on the heatercore being solid

Make sure you get a led flasher. Heck I might have what you need nors from the cuda.

Both sides likely need grinding