R

Profile posts Latest activity Postings Post Areas About

  • Hello J Robb. I am too embarrassed to ask this on your thread so hope you do not mind me doing this here. What is a W head and where are they purchased and what is there application. Thank you.
    I did find a place where you put oem magnum rocker gear,pushed and microcontroller lifters. Is it possible stock length will work with the 4.85 lift the lunatic 20200715 has ? Plus it would be a little more with the 1.6 ratio rocker
    I don't know how to link it to you sorry. I guess I'll have to buy a pushed length tool then thanks for answering back
    On your truestreet 360 build did you use stock pushrods,length?? Thanks!! It is a great article and I'm working on replicating it. Thanks in advance!
    R
    RAMM
    Link me to the article to jog my memory please.
    R
    RAMM
    I think they were a very common size , but not stock. 7.500"?
    Hey Ramm. Would you mind giving me a quick rundown on the best way to check all that. I imagine i'll be taking the timing cover off as well? Will I have to remove my gear drive?
    was woundering your thoughts on a 318 stroker build and 302 heads,..what work it take to make them work with 4 inch crank and .530 lift cam or so?
    R
    RAMM
    Lots and lots of porting. I wouldn't recommend 302 heads for anything to be honest. Get some J, X' 596's anything but those.
    dirty white boy
    dirty white boy
    came on motor i got,..found new 4 inch stroker kit for 1000 bucks but kinda opposite direction im was planning and above budget,..and no way i can do kit and heads to,..got a half brother was the head porter for arringtons hoping i can talk him into fixing the 302s with bigger valves and port work...really like to find set of 308s but them might as well get the 360 under them..lol decisions...
    Good to see you post,again. Damn, that's an old school combination. Give you credit, for working an old style Torker that much. Posted my numbers,see you next time.
    You take your kids to a crappy zoo on the side of the road. It has one animal, a dog. What kind was it?

    What do you call a vertically challenged person, whom escaped from prison, that can commune with the dead?
    I did recommend a Voodoo part # it is there in the post. I didn't know you needed heads --I would no doubt use the EQ magnums # ch318b. They are just awesome for the $$$$$ I can and have made well over 500hp with them in stock stroke 360's. J.Rob
    RAMM, I was wondering if you wouldnt mind giving me some help in a 360 build. I gave you some specs earlier in your post. It is the engine I picked up that was built by Russ Bartfield several years ago. I need to purchase heads, intake and carb. You were not too thrilled about the Crane Cams Fireball too, you recommended the Voodoo Line but you didn't specify which one. I hope you don't mind me asking for your help. Thanks,
    Copper Dart.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top