Search results for query: *

I all, I helping a member with a radio delete plate for his Barracuda, I have deduced the height and width and the post spacing and length but what I can't deduce is the thickness. If anyone has an OEM 67 Barracuda radio delete plate handy would you PM me so I can get the dimensions I need to...

THIS IS NOT A SALE AD NOR A FISHING EXPIDITION. I DO NOT HAVE ANY TO SELL AND I HAVE NONE IN THE WORKS! Factory Heater Delete Fresh Air Vent for the passenger side of 63-76 A bodies (stock photo for identification) THIS IS SIMPLY to get a feel if there is enough interest at the expected...

Ebay dash Bezel red is a missing tab

Hi all, I reverse engineered the MAP LIGHT Bezel and printed it in Aluminum and Stainless Steel. I need someone with an OEM dash that has an OEM MAP LIGHT (or ANTENNA) who is willing to test fit the bezel. I'm looking for: Does the locating post fit in the dash hole properly Is the...

Looking for the member restoring a 67 Dart heater radio bezel. He used oven cleaner to remove paint and chrome, in the last 30 days or so. I have searched but we all know how well that works! I have a part of a bezel that might assist him.

I'm making the internal parts to repair the 72 up Dart - Duster - Demon Dash The gaskets, and the light separators. Turn Signal and High Beam Bulb Separators 3X Gasket - Turn signals and High Beam Lens 3X Brake - Oil Warning Light Bulb Separator 1X Gasket - Brake - Oil Lens 1X Gasket -...

I'm working on a project for @Davecuda to Reverse Engineer the Guide and Gear on an A Body Sunroof. He sent me the crank mechanism and me being me, well you know... The Parts From left to right Cable Guide Plate Gear Crank Shaft Brake Spring Housing Shoulder Bolts I suspect there 2 star...

I'm assuming that the large roller is supposed to spin freely, but it doesn't. Can anyone confirm or deny that the large wheel does or does not spin freely.

If you buy bucket seat frames that have been media blasted, would you rather buy them raw or with rattle can self etching black primer

It was my understanding that 66 and 67 A body and 67 B body bucket seats are the same frames. I bought from a member here real 67 A body bucket seats and I found in a wrecking yard 66 A body bucket seats. I have taken the fabric off of both and they are not the same. The 67 back has the...

I picked up a couple 67 GT seat medallions So what was the first thing I did... CAD them up. This is just the first draft and I'm sure I'll have several more before I m happy

Does anyone have photos of how this kit is supposed to mount to a 66-67 A Body 67 B Body seat frame? (NOTE 68 Up, the frame is very different) I looked here on FABO but found nothing conclusive PG Classics Kit Based on the part count this is the way it seems to go on the seat. BUT I feel...

As you know I'm making the misc parts to rebuild the 67-69 Barracuda folding seat latching mechanism. I discovered an oddity. The chrome knob's threaded hole is not centered on the levers tapered hole. I'm reproducing the Chrome knob and need to know... is my lever a one off mistake where...

Well I'm real close to having a full set of repair/rebuild parts for the folding seat latch mechanism for 67-69 Barracuda. I currently have the Cam in stock, the Lever and Knob I will be ordering shortly. The bushing I will find a suitable hardware store replacement and the sleeve I can print...

I'm one step closer! (MODS this is NOT a sale ad it is just an announcement of an up and coming part) As you may know I reproduce the cams for the folding rear seat. Last weekend while picking, at a soon to close wrecking yard, I scored the center lever, square rod, hinges and other...

Issue Resolved! Hi brain trust! I member of FBBO contacted me to buy a console tach mount. He needs one for a Coronet R/T I was all set to ship the Tach mount that I make but stopped because I recalled the B Body tach mounts directly to the console. Rather than like the A Body which...

I and some others have asked from time to time which seat tracks interchange over the years. I did some parts book digging and this is what I found. (keep in mind that just because a part number changed - think supersedes number - some of the tracks MIGHT actually be interchangeable) I added...

I have noticed my belt size has gotten bigger as I have gotten older. I'm starting to notice that my front seatbelt is a bit tighter than I would like. I was looking at my stash of seatbelts and noticed that one of the belts was longer than the rest. Certainly it must be for the front so I...

I was doing some parts book number search for a convertible top switch chrome bezel / nut for a 67 Dart Convertible. I discovered... Emergency Flasher Convertible Top Windshield washer All use the same part number 2580774 According to moparmall.com it's used 67 thru 71 It is reproduced...

Hi all. As some of you know I do reverse engineering and custom designing of small parts, one of those parts is the interior rear quarter trim retainer. There is a seller on E-Bay selling the same part. This seller is not me. I bought one of his parts to compare to mine. I'm not sure how...

Hi all, I need photos of the tags for the front and rear seatbelt tags on the buckle end. Specifically black and 66-4 for the year code but not a deal breaker on either. Side note.. the 67 parts book looks like the front or rear seatbelts for all Chrysler cars were the same part number, color...

Hi all, Will 67 thru 72?? bench seat tracks fit properly on a single 67 bucket seat? thanks.

Hi all Are 66 A body bucket seats the same as 67 A body bucket seats. The upholstery patterns will be different I assume. ARE: Seat back covers the same? Slides the same? Frames the same? Lower side covers the same? Thanks

My intent was to see if it would be possible to replace the mirror in a 67 Dart Day/Night mirror. The first thing I noticed was the housing was crimped to the mirror. I started out trying to streighten out the crimp but mostly I just stretched the crimped edge. I was finally able to get the...

Has anyone ever successfully changed the day night mirror glass out? 67 dart, GT trim

Radio delete heater bezel 67 68 69 DART GT GTS DASH HEATER CONTROL TRIM BEZEL RADIO DELETE NON A/C OEM | eBay

You know how every once in a while you happen to be in the right place at the right time. (Never happens to me) Yes folks that is a NOS 67 Dart GT radio bezel, tag on box says Oct 66. Price was amazing as well. :):):):):):):)

Doe anyone have any first hand experience with mixing NOS dash bezel parts with reproductions? Black paint the same color? chrome the same sheen? texture the same? fitment?

Anyone know if legendary is having issues. I purchased a convertible weatherstrip kit and a well liner. Nothing on the site said delay or back order. A bit later I got an email saying that the products are made to order. I contacted them and the response was we are at the mercy of our venders...

Does anyone know if Dodge made floor mats for 67 Darts back in 67? My dart has two rear rubber mats that have been there as long as I can remember.(kind of a waffle pattern). Just wondering if they are OE or just something my dad picked up along the way. I'll look them over for part numbers...