Search results for query: *

My wife and I are looking to relocate to someplace where my 67 Dart convertibles can be happy in a large shop. We have seen several properties in the Kimball, and Scottsbluff areas. I'm looking for first hand accounts of what it is like living there in this decade. Weather? Hail, Snow, Wind...

Not a bad Mopar turnout 3 blocks and about 300 cars 19 mopars At least the A bodies got some recognition.

It's always good to be the only Mopar!

20 Mopars vs 200 Ford's and chevys

Nice show, first time going. Several Mopars.

Well I have been proven wrong yet again... (Not surprising!) I have 3 - 67 speedo heads and 4 - 68 up speedo heads. I'm preparing to have 2 of the 67 speedo heads repaired. In the process I am identifying parts on the 68 up that are better than on the 67s. The face plate from one and the...

This is NOT a sale ad, and I'm NOT fishing. When I was picking a couple weeks ago I grabbed some stuff that was just lying around Some I have a pretty good idea others not so much. If you recognize something being a specific year or trim that would be helpful #1 Dash trim early A? #2...

I found a old rusted and dirty ballast in the wrecking yard. Not having anything to loose I took the strap off and soaked it in evaporust, then tried to get the rust stains off the ceramic, so I said WTH, and put the ceramic and resister in as well. Next day took it out, clean and white, not...

Well it was inevitable. A local wrecking yard with several 60s mopars. (Early As, 67 thru 76 A bodies, B and C bodies) Has had its final sale day. The property and all cars and equipment was sold to the city who will no doubt crush the remaining 2 to 300 cars from the 40s, Ford, Chevy, Mopar...

63 B or c body B block exhaust manifolds on an A body with a 383? Will they fit

I have been using a 12 v power supply to do testing on some of my MOPAR parts I make. Today I got it out to stress test a pigtail. To my surprise it was putting out 22 volts. 16 with a 3 amp load. It is not a variable supply and it's max is 5 amps at 12v. I suspect some of the components...

Had to go on a Sonic run. My record was last year at -10f Was officially -4f, my temp gun read 1f on the rear tire of my minivan that stayed out at night and was not in the sun. Inside garage temp 2 pedal pumps, 2 short cranks and it fired right up. 1 deg on the rear tire. At Sonic, 15...

As many know I reverse engineer and manufactur unubtanium parts. Parts that the aftermarket doesn't make. Usually I stumble on a needed part when someone asks "does anyone make this part" I figured I would reach out and ask.... Does anyone know if a part that is not reproduced, that you...

From the "Elf on the bumper"

Hi All, I'm trying to get to someone above the sales people at M&H. M&H has the molds to make single and dual SAE over molded connectors / pig tails. Every time I have called I can only get to the sales people and they will not transfer me to anyone else. As part of my reproductions I need...

I got an email that I had to use to get the free shipping. UPS, or freight I don't know if the link is specific to my account or I would post it. Just realized you can get the free shipping by going to AMDs Facebook page too

I remember from at least 2020 that they posted they were eliminating most if not all of their A Body sheet metal. And when supplies were exhausted there would be no more. I stumbled on the AMD Facebook page and someone was mentioning about how great their sheet metal was. I piped in and said...

This happens so often and its very frustrating to everyone. Please clean out your Mailbox BEFORE you offer something for Sale or post a Wanted ad. There is nothing worse then having the part and then having to remind the poster to empty their mail box. Better yet become a GOLD member (its not...

A little over 24 hours went from this.... To this Best of all no metal loss like acid does It also makes chrome sparkle like new. Doesn't do anything to pits or loose chrome but dang!

Great show, a lot of Mopars. Hot as blazes, but it's a dry heat! Yes that is 3 - 67 Dart convertibles! 2 barracuda convertibles And the odd man out - 68 383 GTS hardtop. There was also a purple AAR Cuda, and 70 something E body convertible.

So here is the question... If a product is made using the same equipment in China vs. in the US how much more are you willing to pay? I priced out manufacturing a part and it would be 9X more expensive to have it made in the US vs in China. The equipment is the same, the shipping is the same...

Hi all, On the customs forms there is the "Harmonized Tariff Number", I recall shipping cell phone case samples to China and this was an important part to the shipping documents. We had a team dedicated to logistics so they provided the numbers. So the question... What do you all put on the...

There is a group called MOPAR CARS & PARTS ONLY SWAP MEET In the group is an Admin called Mike Richard Bradway I forgot to add all the admins were added about the same time this year, and their profiles are thin He posted a listing for parting out a red 67 Dart Convertible. I asked about...

Hi all, Found a " too good to be true" deal so I'm looking for someone to help me make sure it's legitimate. Let me know Thanks

A decent showing of A bodies

I did some long overdue maintenance on our 2006 Dodge Grand Caravan, 3.3 V6, 159,000 miles. Mostly a grocery getter with the occasional 100 mile trip to Denver and back. We are the original owners, and it has been relatively well maintained. Valve cover gaskets Intake plenium gaskets...

I have a water leak on the driver's side that drips down on / near the fuse box. It seems to be worse when the wipers are running. So I finally bit the bullet and got to fixing the pivot. I bought the kit from Detroit Muscle Technologies, LLC Mopar & AMC muscle car restoration gaskets I'm...

THIS IS NOT A SALE AD... ---NOT MINE!--- Just trying to help a friend A friends family has a 37 Dodge Coupe that has been "sitting in garage since the late 70s". "it does not run" is the only info I know about it. The family is thinking about selling it. MANY unknowns here so I'm just...

I'm looking for @Skrame100 He loaned me a part and I want to return it to him. I looked through my PMs and finally found his handle but he has not been in FABO since 12/23. I have an address but want to be sure it's still the correct one. Thanks Dana