Search results for query: *

Hey guys and girls I just bought a 75000 mileage 318. After doing a compression test the cyl 2 failed because a cracked valve seat and cylinder 2 have bad pitting. So I sent the block to machine shop for sleeving cyl 2 because the other cylinders was in really good condition with minimal wear. I...

I'm going to rebuild my 318 with desire to have much torque from idle and up. I want the engine to be strong and have relative good mpg, after that I want it to be "fast". So in that order I have choosed my parts to suit my needs. I have bought: KB167 30 over pistons Scat I beam rods 302...

Today when I was degreeing my cam I bumped into some problems and have some questions. The cam is a Comp XE250H and have 106° intake centerline. I installed the brand new Comp Cams timing chain and sprockets with the 2 dots lined up. When I then was degreeing the cam I've got 59° 0.05" before...

My rocker arms on the shaft is very loose especially on the intake rocker arms. This is roughly how big the gap between the rocker arms and the shaft. The gap vary on all of the rocker arms. Is it time to change to new rocker arms? Since I'm changing cam, lifters, springs and valve stem seals it...

What causes the engine oil to smell gasoline? Would appreciate some help from you FABO member the engine is a 318 with electronic ignition. The car haven't run for over 2 years so for now i'm trying to get it running. It runned good before i took the carb apart because it was dirt in it so the...

Hey I'm want to throw together a nice street car and i don't want to build a stroker because i like the idea of a 318 which is fast. I appreciate some help from you fellow FABO member. Is this a good combo on a 318? *Edelbrock rpm head *Keith black kb 167 pistons *Eagle I beam rods *Edelbrock...