Search results for query: *

Going to new Hughes rocker arms on my 408 stroker. Edelbrock heads and comp extreme hydraulic energy cam. 488- 491 lift. 230- 2360, 274-286 duration. Guy at Hughes said either ratio will work. I welcome any other input. Thanks Tony in Michigan

Looking at roller rockers for my LA 360. Mancini sells made for Mancini by Harland sharp rockers. Anyone out there running them?

Looking to upgrade my 408 stroker with 273 adjustable non roller to roller rockers. Tops on my list are Hughes rollers, they go for $550. A friend who buys from Mancini says they sell aluminum roller rockers that are made for Mancini by Harland Sharp. I know the Harland rollers that are sold...

Did not know where to place this topic, let me know if it is not. This was brought up at a car gathering. Talk got around to E-85 and how it could cause problems if used in classic and muscle cars. I know most use premium gas, in Michigan almost all gas has 10% ethanol, not enough to cause...

Going to replace the gasket and washers on my smallblock 90 degree oil filter adaptor. The kit came with four washers that go on the bolt, one nylon, one fiber and a cork washer that I think would go in between the adaptor and block, and a copper washer. The instructions say nylon washer between...

Got a oil leak in the rear pan area in my small block. I thought we found it but I still see oil leaking. Did anyone ever use some sort of dye in the oil to find where the oil is coming from? Thanks

I'm trying to correct a leak issue in my 408. Chrysler offered a special rear anti leak main bearing for a LA small block, it kept the oil away from the rear main seal, p4349043, but it has been discontued. Anyone got one. Checked with Mancini racing, nothing in the dealer network. Thanks...

Getting ready to change the pan gasket on my 360. All the ones out there are the 4 piece type. The LA block is different han the magnum, there are one piece gaskets for the magnum but none that I can find for the LA motor. Any suggestions. Thanks for the help Tony in Howell

I have a 408 stroker with less that a 1000 miles. I have a leak at the rear of the pan. Is there any way to tell if it's a pan gasket leak, or rear main seal. If the trans is removed along with the pan, is there any way to tell where the problem is? I don't want to change the pan gasket and...