Search results for query: *

Can anyone tell me if these are 73+ /6 to SB mounts? All I can tell you is that they are NOT /6 to BB mounts, so they have to be either /6-SB or SB-BB.

I have a 440 motor home block (about a 78) and the provision for the dipstick has some sort of plug in it. Is this plug a press fit or threaded? I'm tried to put some vice grips on it, but no matter how hard I tried, they just slipped off. I don't want to go pounding on it with a hammer and...

I bought a 440 that had been sitting for a while. It's a 76-ish (ext. bal.) motor home engine. I pulled the caps to check the barings in the bottom ends. All the bearing look fine, the crank went back in fine. I put the rod bearings back together (without spinning then engine over each time)...

I have a 1978 440 from a motorhome with 452 heads. I was tearing down the heads to put in new valve seals and clean everything up. I got all the intake valves out fine. However, the exhaust valves won't come out further than the grooves where the locks are. It's like the grooves are catching...

Well, my memory failed me while I had my motor disassembled. I kept the rod caps in order, had them marked 1-8. However, what I did forget was which way they were orientated on the rods. It's a 1978 440 out of a motorhome if that makes any difference. Does it make a difference if they're...