Search results for query: *

I CADed up the connector and had some made in Nylon 12, BUT I don't recall who needed it? Will the real requestor stand up!!! (or anyone else who needs one)

So I was going to a car show today an hour from my house... I got 1 block from the show entrance and my engine died. Crank and would sometimes fire but would not idle unless full throttle. Then it would start and idle but the moment you gave it some gas it would die. Got out and pulled the...

Hi all, I'm in the process of making the 2 style insulators (connectors) for what appears to be all 67-69 Chrysler cars. MY QUESTION... on the 68-69 insulator when the tabs are locked onto the switch and the insulator is pressed all the way on is there a gap between the lock tab and the lock...

I have a project where I need to crimp on the little brass terminal in lamp holders. I bought some from one of the eBay or online venders but was having a time trying to get a proper crimp. So I went looking for a different seller that might have a different part. I tried several search terms...

I take an injectable medication that is one of the push button injectors. to save space in my Sharps container, I have been removing the glass vial / needle from the plastic parts. I discovered one of them has a long spring that is the perfect diameter for light bulb holders. Not all injectors...

Short story.. My dart has had some odd charging issues lately. The issue was high current in the ammeter but low voltage at the battery. I checked out everything and am satisfied the battery is the issue. Changed it and the issue went away. Now the ammeter reads slight charge right after...

I'm working on making the foam gaskets that go between and around the gauges and lights inside the 67-71 Dart gauge cluster. The foam will have peel and stick adhesive on one side, black in color with a density and thickness to match the OEM parts. NOTE: The kit will come with one extra...

Does anyone have photos of the insides of a convert top switch. I bought one that needs repair and turns out it got real hot internally at some time. There is a spring loaded plastic pin that causes the rocker contacts to rock when the lever is moved. It was very melted so I don't know the...

Hi all. In preparation of my console base part coming back from the manufacturer, I wanted to make a 3D printed template to positively locate the mounting holes on the console. If your tach is off the console then one measurement would be needed. If you tach is still mounted than another...

Looks like someone is making a functional replacement. Back-Up Light Switch Trip Pin for 1967-1968 Ply - Dodge - Chrys w/Column Shift | eBay

Some time back I was disassembling and cleaning the switches from my 67 Dart Convertible #2. All went well till I got to the wiper switch. Switch number 2820525, 2 speed with the resister on the back I successfully got the switch open without breaking anything, always a good thing, which...

Hi all. After seeing what @soonercruiser had to go through to get proper backup light bulb holders for his chrome housings I thought I would see what I could come up with. First take (yes I know the tabs are backwards already fixed) After a couple hours if cad and 3 hours of printing...

I was parts picking the other day and found some 67 dart horns. There were 2 hi tone and one low tone. The price was right so I got all 3. Figured I had a better chance of a working horn if I had 2 of each. Well one would not vibrate at all and had high numerical resistance like in the low...

Hi all, I'm looking for some snips from some wiring harnesses. Cigarette lighter connector and red wire. Good connector and a foot of attached wire will do me. As I recall the connector is 90 deg barrel connector like the fuel sender. As many feet of violet ( no tracer) backup light wiring...

Picked up a wiper motor core. 67 Dart 2 speed??? It seems to be frozen. I'm trying to get the outer motor shell off. I have tried light tapping around the shell where it mates to the gear box. Tapping down where there is a lip I can tap on. I put some light oil on the seam (can't find my...

I have got everything disconnected except.... There is a spring clip on the back of the cluster that is holding onto the main wiring harness. I have a few other clusters 68 and up so it might be a bit different. The 68 up clip looks like this and the orientation is the open end is the top...

I was thumbing through the latest Chrysler Power and right there is a schmatic of an electronic controller box. And some time ago there was a post asking what the 4 or 5 wires do. I mentioned that I believed one of the pickup wires was grounded inside the box, well what do you know...

Classiccarwiring.Com 25% off this weekend only.

NOT MINE Rally oil pressure gauge NOS - 20 minutes left on ebay no bids yet $50.00 NOS MOPAR 2771640 OIL GAUGE 1967-71 A Body Dodge Plymouth Rallye Dash | eBay

As some of you know I fried my temp gauge when my mechanical IVR lost the heater wire full volting the temp and fuel gauge. It still functions, but normal operating temp is just at the low tick of the temp gauge, normally it would be 1/4 past the low tick. (Note: the temp gauge is 67 so the...

I was board one day so I checked continuity on all the pins of an ignition switch, The switch is reported to be a 67-69 dash mounted Dart compatible switch. An "X" means the pin to itself The green highlight indicated continuity "Open" means no continuity "Closed" means continuity There is a...

I don't recall who started the thread but if you can't get one sent directly to you, I will buy one here in the US and ship it to you. You just pay for the IVR plus shipping to me and shipping to you in Canada RTE limiter - rte (I just bought an IRV4 directly from RTE and it was $50.00US plus...

Look what I stumbled on in my 67 Dart FSM Empty is 73 +/- 12 ohms (61 to 85) Full is 9.6 +/- 1 ohm (8.6 to 10.6) Confirms the image that has been passed around for years The values fall nicely in my chart and graph

Stumbled on this artical. Don't know anything first hand, but the amprage drop is notable Gallery: Holley's RetroBright LED Headlamps Provide Superior Lighting - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech OOOOOF! I...

Add me to the failed IVR club. My IVR lost it's resistance (heater) wire. Was driving along and WTF gauges pegged. Turned key off costed to a safe place, reached under dash, pulled out the IVR and finished my drive. Fuel gauge seems to have survived, sitting at a normal key off place, water...

I love these old videos

When to check the rpm and dwell on the dart today. Got out the OLD trusty Actron Automotive Analizer. Hooked it up, started the engine and the needle was bouncing all over the place. That's odd! Bad points? So i checked the battery voltage. Same thing, so i figured the meter finally gave...

First video, newly rebuilt square back alternator with 3.75 dia pulley. https://photos.app.goo.gl/t6jbzbnnfiT3EB2p8 Second video newly rebuilt round back with 2.5 dia pulley https://photos.app.goo.gl/Cpjcr3SzWekvi5Qq6 Same single field wire regulator. Both alternators setup for single wire field.

Hi all, I had to buy a (shiver:eek:) square back alternator for my 67 Dart to get it back on the road while I locate a reputable rebuilder. I know I know the square back is better, but I want a round back. I have 3 cores and 4 pulleys to choose from. Anyone know of a good rebuilder. I have...

Hi all, 67 dart round back, single field wire alternator. I was wondering if square back stators and or rotors interchange to round back alternators?