Search results for query: *

  1. W

    Alternative for Proportioning valve

    I have a 72 Dodge Demon I have installed a hydroboost system with factory 74 front disk brakes and drums on the back . I am on my 4th proportioning valve I have installed two Chinese piece of junk both leaked all over and have rebuilt to factor valve first leaked internally the one I have...
  3. W

    disk brake lines

    I have a 1972 Demon that I did a disk brake conversion with all 73 a body parts . got my car up on jack stands and when you turn the wheel all the way to one side the line are tight the lines a new 73 dart lines . Any ideas on a longer line . Thank you Waco Demon
  4. W

    Hydratech brake system

    has any one used the hydratech brake system . Waco Demon thank you
  5. W

    Electric Vacuum Pump

    Has any one installed a electric vacuum pump for low vacuum and what kind Waco Demon Thank you
  6. W

    Weatherhead brake proportioning valve

    Has any one rebuilt a Weatherhead 3549947 proportioning valve . My problem in the small piston between the two sides of the valve will not come out . The info I have tells you to tap the valve on the work bench or put air behind it from the rear brake side and pot it out . I am not having any...
  8. W

    leaking brake valve

    Has any one had problems with new brake valves leaking . I have a 1972 Dodge Demon did a brake conversion all factory parts new I have installed two new brake valves and both leak I know this one is not leaking at the lines I think at the top where the line from the master cylinder goes brass...
  9. W

    leaking Brake lines

    I'm building a 72 Demon I have disks in the front and drums in the back . I have installed all new In Line Tube Stainless lines . We got all the leaks in the rear taken care of but the front end is a different from the proportional block to the front wheels all the fittings are seeping ...
  10. W

    Wilwood Brakes

    I'm puting Wilwood brakes on my 1072 Dodge Demon . I'm changing the spindels and upper A arms to get the larger upper ball joints . Do I need the disk brack 73/74 spindels to install the Wilwood brakes ? Waco Demon
  11. W

    Disk Brake Convertion

    I'm doing a disk brake convertion using a set of 1976 Aspen brakes . I'd like to know if I can use 73 - 76 a bodie drum brake upper a arm ? Thank you Waco Demon
  12. W

    1976 Aspen disk brakes on 72 Dodge Demon

    I found a 76 Dodge Aspen . Will the disk brakes work on my 72 Demon ? If so do I need the lower arms ? Waco Demon
Back
Top