Search results for query: *

How much play should the rockers have on the shaft. Mine will rock about 1/8" sideways on the shaft. Seems like to much to me. Bruce

Are the pump and pu tube the same 318-360 center sump? Wish this weather would make up it's mind 90 degrees today. Thanks and God Bless Bruce

My starter went out so I dug out the small high torque that was on the 360 when I bought it, hobe wan kanobe batman, that worn out 318 starts just by looking at the key. Those starters are really worth the money. Bruce

Are magnum and pre-magnum center sump 360 oil pans interchangeable?

I'm getting some rattle from the pump, tightened the pulley as far as it would go, still has about 1/4" end play. Is it missing a spacer or is the pump going bad? I just replaced it last year, rebuilt not new. Thanks and God Bless Bruce

I'm having problems getting the kickdown in the right place. In order for the tranny to build pressure before shifting the rod is so long I can't get full throttle. It does work when floored (adjusted to get full throttle), but shifts very early at low throttle. I'm using a holley spread bore...

I put a 360 intake on my 318 in order to use the newer a/c compressor and now the engine is using oil, and doesn't idle very well,no smoke from the pipes, I used 360 gaskets, and have sprayed all over for leaks, no vacuum leaks on top, could it be pulling from underneath? any ideas? Thanks and...