Search results for query: *

Ok, working on my floor pans on the 64 Barracuda. I just got in generic 60-64 Mopar trunk extension replacements. they look close, but are going to need 'massaged' to fit. My skills in this arena are severely limited. I need to remove the old extensions, and fit the new ones. My...

Ok, I'm perplexed. I have 2 replacement inner fenders for my 64 barracuda. each has their own issues, neither is perfect. Inner fender "A" had slight damage @ the top, and major surface rust, that, after blasting, left the bottom, where it welds to the upper part of the frame rail rather...

Anybody out there re-popping 64 trunk extensions, or am I on the hook to fabricate them????? FF

Ok, haven't been in the garage for some time to work on my '64 Barracuda. Was out getting a few things from the garage, and had to move the box that had one of my spools of mig welding wire inside. Looked inside and saw a thin coating of rust on the steel wire. Myh question, being a newer...

Ok, looked closely @ my trunk lid for the first time and saw some remnants of repaired/delayed rust on the inside of the bottom lip, never have repaired this kind and was wondering what the best method/technique to use on this is, here's 2 pics of what I'm talking about. The car is getting a...

Before I spend the money, will the driver's side inner fender from a 1964 Dart 170 fit a 1964 Barracuda??????? Thanks in advance FF

I am about to remove all of the trim from my 64 Barracuda. Well, what's still on the car. I know the wheel opening trim is just screwed on. My question: There is trim @ the very top of the quarter panels that runs from just behind the doors all of the way back to the taillight assemblies...

Ok, I gots a question or 3. I have removed the old inner fender from the car, the new(er) inner fender has been test fitted and is pretty good, BUT, and this is the big but, and the gist of this thread: the seams on the inner fender, and the matching "tab" area where they will weld to, match...

In the following pics, I have shown a problem I have. The center section of the 64 grill is broken on one side. The material appears to be a pot metal. What would be the best way to fix this?? I have a pic of the good side, and of me holding the broken part near where it goes. Thanks FF

I have a 64 Barracuda, pretty good shape(no rust outwardly, floor pan was homemade, but will be taken care of, but the one issue I must deal with when I pull the engine/tranny is the inner fenderwells. Someone in the distant past had a pair of fenderwell headers on this car, and hacked up the...