Search results for query: *

I'm looking at 2 sets of roller rockers for about the same price, One are the Comp aluminums, the others are the stainless steels from KMJ, This is for a street engine, what would you use? There chevy stud style rockers. These...

Anyone running this cam, how does it perf.? :glasses7:

The CCH-312-2, I had one in a 70 340 Duster, it was a 4sp. with 3.91s, stock bottom end, Had triple valve springs. I used to shift that thing at 7200 RPMs, sometimes as high as 7400 :lol:, It would free rev. past 8000 & bury the tac :D. Anyone ever run this cam in the day? I thought they even...

I have a friend that has a 70 318 that he was taking to the scrapper, i've seen it & its complete, he doesn't think its worth anything, i told him i'll take it if he's going to junk it, i'm sure its a good engine, he doesn't know if it runs or not, but its not locked up, from what i've seen on...

Does anyone run these plugs (BKR6E-11 "2756"), talking with a few, i was advized not to run a "projected" noise when running nitrous, These plugs are 1 heat range colder & the nose isn't as projected as the Autolite 3924s that i run now, this is for a 95 360 magnum. I'm only hitting it with a...

I'm in the market for a higher volume pump for my 360, right now it has a parts house pump thats putting out 7 lbs., but i'm not sure of the volume, I would just get a holley or Carter M6902 that freeflow about 110, But there 100.00 or more, just can't swing that, so i'm looking at the Summit...

I've heard many are useing these, i'm only finding them as big as 9", who's useing them? Are you useing 1 or 2 fans, doesn't seem one 9" would be enough, do they make them bigger?

What would be a stock amp alt. on a 71 Dart, 318 with AC., are there any options for a higher amp, would it be beneficial to up-grade?

What fan will fit in a 71 dart with a SB, right now i have the solid fan off the 318, wanting to go with a clutch style, i can get the "clutch" from the parts house, but the fan is not avialable, would it have to be specificly for an A body, or is that just the clutch itself?

I'm finding out this magnum engine runs stronger with less timing, right now i have it at 10* int. 31-32* total, & its all coming in late, a good 3500+ rpms, the other day i decided to run it up to 12* int., it didn't like it, i'm going to try 8* int. to see what happens, i'm running on 87...

Its in a 71 dart with a 360 magnum, basic bolt-ons (headers/RPM intake/750 3310) & a re-ground Bullet cam (.477 lift, 216/218 dur. @50, 112 LSA), 904 trans, Hughes 2500 stall, 8.3/4 rear, right now its a 1 legger with 2.76s & the 741 case, i would go with 4.10s, but the kicker is, in the near...

Other then the rear main being smaller on the 360 along with the rear seal being different (smaller) is there any other differance in the pans, meaning, if someone were to modify a 318 pan & weld up the rear lip for the smaller seal, should it just bolt on & nothing hit like the crank...

Purchased a Procomp HEI distributor off e-bay, figured i'd give it a try, its the big cap'd version with the coil in the cap, well its a POS, it doesn't fire, theres been talk on other boards of the module being bad right OOTB, now some others are useing there "drop in & go" dizzys that use an...

What are some of you useing in your mild 360, is there anything worth while from say O'Reillys or Napa? I would just get a Carter street pump, but there pricey & i've had issues with some in the past, also heard they've gotten crappier here lately.

engine too run a mechanical fuel pump, part #7013, has anyone installed one of these? I got one but the instructions seem alittle vague to me, i don't want to install it wrong, any help would be great.

Found a company in WV on e-bag that has "new" stock magnum heads, they come with a 1 yr. warr., heavier castings, they are stock replacements, all they do is make sure they are true (fresh surfaceing) & inspected before shipping, the price is 479.00 for the pare, shipping is 74.00 to me, the...

took them in today, he didn't even have to Mag them to see the crack in the one head, but he mag'd them to show me & sure enough, cracked in-between the valves on both heads, are any of you running the RHS heads from Hughes engnes, they are out of the "magnum rams".

Sence i go zilch 0 responces on this is the exhaust section with 49 veiws lol, maybe i'll get feedback here, its been awhile sence i've installed headers in a SB A body WITH PS, i did awhile back on a 73 with spool mounts, don't remember what brand i purchased, but they fit ok, don't think i had...

Who out there has the best prices on a stock oil pan & pick-up, i need one for my 360 magnum to drop in my Dart.

Which would you preffer, i can get either a 95 360 Magnum, or a 70s 360, both were supposidely rebuilt with low miles, there both around 400.00 for either one.