Search results for query: *

$100 + shipping (free pickup in the Detroit area) Bought for my 1972 Duster...that I no longer own. Been hanging on my garage wall for a number of years now. Used one Summer before switching to an aluminum radiator, which had no mounting tabs. My fan did hit the shroud a couple times because...

$100 + shipping (free pickup in the Detroit area) I bought this here in FABO but I sold my Duster before using it. Never used...includes instructions. I am pretty sure most everyone has seen these kits on FABO from "crackedback", but here is the link: Plug and play - Headlight Relay Kits

$325 includes shipping. New Mopar A-Body CALTRAC Traction Bar System Brand new unused bought new, just sitting in my basement gathering dust. I bought them for my Plymouth Duster and have decided not to use them All parts are still wrapped up in the box they came in, I opened the the box to...

$125 Shipped to your door. Finish is still pretty decent, could use a little clean-up. It has a manual choke set-up. I believe the carb to be stock as far as jets and the rods go. It came on my Duster when I bought it and I used it on and off for maybe 1000 miles or so. I installed a...

MECHANICAL ITEMS All Items $11.00 each plus the shipping costs • electric cooling fan (used - good working condition - I don't know what CFM?) • SOLD front leaf spring bushings (new - AC Delco part #45G17012 SOLD • SOLD shackle bushings (new) SOLD • upper ball joints...

$125 plus shipping Located in Northville, Michigan 48167 These came off a running, driving and stopping 72 Duster. Stock style bearings are of unknown age but work fine. Each axle has three of the original studs and two studs that were replaced at some point in time. Paul

$125 plus shipping. Located in Northville, Michigan 48167 Nice rust-free drums off of a running, driving and stopping 72 Duster. They came off of a western car so they are still really nice, you can even still see the Chrysler Pentastar stamped in them. Paul

$60 plus shipping. Located in Northville, Michigan 48167 A pair of backing plates for an 8-3/4" B-body rear end. These are for the wider brake pads, and can be used with Dr. Diff Axles when converting your A-body to a Big Bolt Pattern. They are rust-free (painted Satin Black?), I bought them...

$60 plus shipping. Located in Northville, Michigan 48167 A pair of backing plates for an 8-3/4" A-body rear end. They are rust-free (painted Satin Black) and came off a running and driving 72 Duster. Paul

$125 plus shipping Located in Northville, Michigan 48167 Used small bolt hubs that were cleaned up. These are for use with Kelsey-Hayes 4 piston calipers. I bought the rotors and studs new, they now have 1,000 or so miles on them. You will need to supply the bearings. Paul

$150 plus shipping. Located in Northville, Michigan 48167 Refinished then used one Summer. There are a couple chips here and there, but still ready to bolt on to your engine and look great. Everything works as originally designed. Stripped clean, repainted Hemi Orange, new decals (the...

$240 Shipped anywhere in the US of A. Came off my mild 340, went with a bigger carb when I rebuilt the engine bigger and badder last year, no longer needed. No known issues when running last Summer. When I refreshed the carb, the front float needed to be replaced so I ended up with a new...

$60 PLUS shipping. 16 ball & cup push rods for adjustable rocker arms. Brand new, no longer available. All were taken out of the package and couple were used for mock up purposes on my 340. From the internet: P4529541 - Pushrod Mechanical "A" Engine 5/16" Diameter 7.34" Length...

$120 PLUS shipping I bought this before the correct radiator was available for my Duster. I added a couple "slots" on the mounting tabs to raise it up to clear my Mopar Performance fan (that may not have been needed with a stock fan???). There is nothing wrong with it, other than you...

$150 PLUS the shipping cost. The numbers say it's a 1971 Heavy Duty cooling 3 row 340 There are also some other numbers "18398" on it. This was in my 72 Duster when I bought it. The previous owner said he had it re-cored, I don't recall if he said how many miles. I used it for around...

$75 + Shipping Located in Northville, Michigan (northwest suburb of Detroit). I bought these when I was thinking about going with a stock look for my car, but now with aluminum heads...I can't use them. I never did anything with them but bought them because they are rust-free examples, are not...

$350...local pick-up only (in Northville, Michigan - a northwest suburb of Detroit). I am going to start out with NO SHIPPING (I have back pain issues), if you can get a local person to come pick them up (and they are paid for) I will work with them. I am also thinking about going to...

$25 + Shipping from 48167 (Northville, Michigan) One set of 16 Small Block Pushrods 5/16 in. Diameter, 7.500 in. Length, Ball/Ball Ends Approximately 4,000-5,000 miles on them...and in excellent condition. Thanks FABO for the ad space, Paul

$75 + Shipping from 48167 (Northville, Michigan) These are the heavy-duty Mopar Performance Stamped Steel Rocker Arms. and they come complete with shafts, hold-downs and bolts. Approximately 4,000-5,000 miles on them...and in excellent condition. Thanks FABO for the ad space, Paul

$50 + Shipping from 48167 (Northville, Michigan) People often don't like used cams...but I thought I would offer this up anyways. Comes with the lifters, marked for the proper position for re-assembly. Approximately 4,000-5,000 miles on the cam. Ran good and sounded tough in my 340. Decided to...

$30 + Shipping from 48167 (Northville, Michigan) Like New - Melling M72 High Volume, Standard Pressure Oil Pump Approximately 4,000-5,000 miles on it. Worked really well with NO problems Previous owner of my car had a deep oil pan and this high volume pump...I switched back to a standard oil...

$70 + Shipping from 48167 (Northville, Michigan) Used Small Block Chrome Stock Style Valve Covers. Still in decent local-car-cruise condition...no dents or rust...just been on a car for a while. they are a little dirty in the picture, my engine suffered from blow-by so the covers are well...

$250 + Shipping from 48167 (Northville, Michigan) Road Demon 4282010VE 625 CFM 4 Barrel Carburetor Bolted on twice to motors...but never used. Choke plate looks dark because of the sunlight...in person it's shiny and new...like I said it's never even been filled with gas. According to BG...

$150 + Shipping from 48167 (Northville, Michigan) Used Edelbrock Performer RPM Intake 7176 ready to bolt on. Only bad is... the rear coil mount bolt is broken off in the hole. I couldn't drill out the bolt, it just dulled my drill bits. But what I did was cut off a bolt short and used...

New Mopar Performance Aluminum Roller Rocker Arms for a Small Block Couldn't find a part number. The rocker arms say "Mopar Performance right on them. My understanding is that they were made by Crane Cams (they look like Crane's rocker arms) They are 1.6 ratio rockers. 14 of the rocker...

1 set of Crane Gold Race Extruded Shaft Mount Rocker Arms - Kit # 69790-1 These are the 1.5 ratio rockers. Lightly used on a car for one season, a previous owner "clearanced" the rocker arms with a grinder? not noticeable when mounted up. They are in real nice shape, and function fine...the...

Cleaning out my basement...asking prices are about 1/2 what you could paid for them new (or what I paid)...so get 2 for the price of one... All were used on my 1972 Duster, I took what i thought were part numbers but couldn't find a match listed on the internet for all of them so i will...

Used but still in decent shape, no damaged threads. It was already painted and on my Duster until I switched to a Performer RPM. The paint strips off easily (I removed a bit of it myself behind the carb area as seen in the picture), use natural or repaint the finish. Some marks on the...

Not sure who made this, but it looks to be professionally done...$60 Plus shipping...Pick up is welcomed! This windage tray requires 2 sets of gaskets and mounts by sandwiching between the engine block and the oil pan, much like the big block Mopar windage trays do. Certainly kind of a...

Used Flowmasters...with 2-1/4" inlets and outlets...$50 plus shipping for the pair...Pick up is welcomed! Inlets are offset and outlets are center in the back. A little surface rust around the seams but still in great shape, not dented up but had the exhaust pipes welded on so I had to...