Search results for query: *

I'm in the process Of redoing the 340 on the quarter panel on my duster Remove the vinyl numbers which was easy , but there is A ridge around the parameter of Where the numbers used to be.I can't get rid of it. Tried three m Adhesive. remover... I tried goofoff adhesive remover, Also tried...

When my wiper motor comes to rest when I turn it off I still hear a little ticking and the amp gauge jumps if I wiggle the wiper switch in the dash it will stop. Thoughts

i have 6 12v batteries that i have to charge in the winter, and would like to find the best way to charge them in a maintenance kind of way all at once without baby sitting them...i know that used tire shops that sell used batteries have a way to do it....

I am not sure where to look for this. I just took a chance on here. Looking for anyone who is using a megajolt or any other engine management controller. I converted my 440 supercharged engine over to distributorless ignition. It's running very well but I am new at the laptop timing programming.

need opinions on putting a flip top gas cap on a 65 dart...

What's the preferred way to do a coolant flush...

anyone making these now for a cable drive dis....

looking for ideas for a scoop to put on my 66 dart straight axle..need ideas like super stock, or max wedge, or six pack ect....

was told buy a guy this is one of dick landy charger oil pans..and they found the whole charger somewhere... any info would be helpful......

i have put my rebuilt/never ran 340 in the valaint, but iam not going to be able to finish it right now, what can i do to keep it good for the winter, the intake is blocked where the carb goes with tape and cardboard, and the sparkplug holes have paper in them...should i oil the cyl down good...

where cane u buy frame replacement parts...

i have a 68 2dr 318 vailant, pulled the engine and trans, hav a go fast 340 727 stall and a 8 3/4 rear to go into it... proble is body is in good shape, pulled rear today, lots of rust at the rear where the sprins go and some at the front of the springs...i know it all can be fixed...but not...