Search results for query: *

hello i have a 408 smallblock with probe flat top pistons, I currently have 596 cylinder heads with 72cc, and I got hold of 2 Edelbrock 63cc cylinder heads for a good price that I want to put on the engine, but now I wonder if I'm going to get to high compression with these Edelbrock cylinder...

hello i have two 974 360 heads with stainless steel valves 2,02 and 1,60. the heads have been ported and someone has milled down the mounts to the rocker arms on the heads, why does anyone do that? anyone have a solution to what I can use for rockers?? I think the guy I bought the heads...

hi i have just changed the camshaft in my 318 engine to a Hughes Engines HMC1326AL-9+5 Whiplash Series. the heads are 318 (302) heads and the heads have been ported. I have also replaced all the valve springs and Retainers from a pair of trashed 360 heads (596). and i have a big problem with...

hey have a 318 in my Dodge van that drink much gasoline, it's a carter 600 cfm on the engine, with 395 nozzles in the primary ports, and 385 at secondary ports. I have tried to put in 385 nozzles in the primary ports but then it spits and spark slams only and runs really bad. it's a new...

hey i have a question regarding 2 valves for my 318 from 1988. why is 2 exhaust valves worn on the tops? is the valve springs bad so they do not have time to close the valve in time?

hello I need help with my 318 tbi which is running mega rich it is in a dodge ram van, I know it is not a a-body, but thought you could help me anyway :) . it is a 1988 tbi engine, ignition works fine and all sensor seems to work, besides the Throttle Position Sensor When I pull out the wires...

hi i have a 408sb with tunnel ram, carburetor I use is 2 x 390 cfm, the engine runs fine on until you press full throttle then it begins to (Counterattack) I can not really describe how it sounds. it feels like it may be gets too little gasoline. carburettor is restored, and I currently have...

hello I'm looking to replace the camshaft in my 408 and and do some work on the cylinder heads. This is in the engine probe 408 Flat Top -5.5cc - SRS Piston 10.5:1 scat 4" cast, crankshaft scat I connecting rods mopar purple cam P4120231 right now COMP Cams Pro Magnum rockers edelbrock rpm...

hey i need some help choosing heads for my (360) 408 stroker. This is in the engine probe 408 Flat Top -5.5cc - SRS Piston scat 4" cast, crankshaft scat I connecting rods mopar purple cam P4120230 COMP Cams Pro Magnum rockers edelbrock rpm airgap intake holley 750 db and the heads i am...

hey have some problems whit new engine (it is a 360 stroked to 408) and that is that it loses oil pressure almost down to 0 under heavy acceleration,oil pressure is 58 psi normally, oil pan is a completely original 360 passenger car pan, oil pickup is about 0.78 inches from the pan bottom. I...

hello i have some problem with my dodge 408 engine, its started to smoke white,and the disappearance of cooler water, it still runs grate, I took off intake manifold today and saw this, white oil in two of the inner inlet valves. the other valves looks good no white oil in them, how can it...

hey I'm about to build a dodge 408 small block stroker. When I put together the connecting rods and the pistons I noticed this Does anyone know why the new rod caps Do not Have oil grooves? will the cylinders have enough oil then? :-s Original vs. scat