Search results for query: *

Hi all, I have my engine in the car, and want to put in my roller rockers. I just got some clevite ball and cup push rods for the job. Nowhere can I find the specs to put adjustable roller rockers on a hydrolic cam engine. My setup is a 360 with the stock 340HP grind purple shaft and...

Hi all, i'm installing my MRE double roller timing chain. The crank key is between 1 and 2 oclock with the #1 and #6 piston at TDC. I line up the dots between the crank gear and the cam gear but I notice that the cam lobe for #1 intake is straight up. Is this correct? I would expect that...

Hi all, i bought a set of procomp roller rockers off ebay. these seem like really nice rockers with needle bearings and all. Unfortunately the support I'm getting from the ebay dealer and procomp are not very good. Here's my problem. Stock push rods for hydrolic are ball end at both ends...

Hey all, I'm about to put in my new springs and cam, but before I did that I noticed that the rocker arm was a little off center from the valve, then I noticed that I have about .09 inches of gap between the two rocker arms on the number one cylinder. Lot of slop there I'm able to move the...

Hi all, Does anyone know if Dodge put a serpentine on a 5.9 LA engine prior to 92 when they went to the magnum? if so, what year and model did they do this on? Thanks, Stu

I'm looking at getting the Mancini cam package (cam,springs, retainers, lifters, pushrods) for my 79 stock 360. What's the best specs for really good power, but a semi decent idle. don't want to be a drag car. I want to be able to drive this thing on regular roads every now and then :) I...

Hey all, I'll be ready to trick out my engine bay in the next few months, and was wondering if anyone has ever taken the serpentine system off a 5.9 magnum and put on to an LA 360? From what I know is that they're basicly the same engine with a tighter angle on the valve train. If so, is it...