Search results for query: *

Was helping a friend in a parking lot repair his headlight switch, when a guy walks up and askes whose grey truck, mine was the reply, nice looking C10 he said......What was my reply. Nice C10, hard to come by he says. Yes a Dodge C10 is very hard to come by. I thought my Dart being called a...

Have a large clock behind my bar. Want to put automotive type numbers on it. six pack for six o'clock, the ford V8 for 8 o'clock, 4WD for 4 etc. Can any of my FABO clan help with some vinyl?

How common was an A/C car with manual steering? converting my 67 Dart with power steering to manual, will need an idler set up for the water pump. I know, can run run belt just from crank to water pump but would like to get an idler. has anyone fabbed one up from other makes ?

Have been looking online for a complete 1999 Dodge Ram 2500 wiring diagram, with Cummins, either comes up for just the radio or for a Dakota. Thanks in advance.

At last found my Cummins. found locally, 1999 4X4 King cab 2500 SLT with 24 valve and just turned 250,000 miles. Got it at a good price, will need ball joints. Question is I have heard that even Moog ball joints are not the quality that they where. Who makes good ones for a reasonable price...

Ok, on my second oil light switch and it leaks after a couple of years. Any one know who makes a QUALITY switch that can handle 70 psi cold? Without leaking after a couple years or 5000 miles?

Have 67 Dart with mild 360 with 4 speed stick. Seems that when I shift it above 6500 RPM, and back off of it, I either have a hose come off, or blow out the heater core. has happened about 4 times over the last 3 years. The motor does not have a blown head gasket, standard pulleys, standard...

Since the cross ram small block intake is out of my price range, was thinking of modifying a single plane intake by lopping off everything up about 1 inch from the cyl head bolt flange and fabricating tubes to a plenum. Going to either two separate 4 barrels cross ram style or throttle bodies...

http://www.smythkitcars.com/ Not sure if this has been posted before, but looks interesting.

will need to get a NEW driveshaft for the Dart soon. Tried to research through FABO, but did not get the info I needed. Who would you recommend getting a driveshaft from? In Arkansas at this time and work in Louisiana, so close to either of these places to save a little on shipping even, you...

friend sent me this when he heard I was looking for a second car, not for me but what do you think?

When cruising after about 1/2 hour, feet start to get warm. The car is a 67 Dart with 360 4spd and factory air converted to Sanderson compressor and 134a. Aluminum Rad with twin electric fans. Engine temp is between 180 -200 degrees and fuel mixture while cruising averages 14.4. The car has a...