Search results for query: *

  1. teringer

    small block 974 head

    I purchased a set of the Indy rebuilt cylinder a few years back for a 340 with the only thing done to them was the 2.02 intake /and 11/32 dia. stems the heads were the 974 casting so I've been on line looking for stock or ported heads with the same numbers for flow ratings I have found lots of...
  3. teringer

    stock x heads

    another how much hp will the 894 head make stock with 11/32 valves being the only mod with a raceing valve job on a stroked 416 with 9.5 compression and voodoo hyd .513/.527 cam with a eddy 340 single plane intake and 1 5/8 header ? is 410 hp possible? with a 750 quick fuel carb
  4. teringer

    cam clearances

    good morning today I'm installing a camshaft in a 1975 318 stone stock engine, after collecting the parts I have 2 question's the lift is 470/274 dur. I planed on breaking in the cam with the stock springs then switching over to the higher pressure springs tomorrow. will the stock springs coil...
  5. teringer

    not a body

    I picked up a d150 today for the drive train 5.2 eng.1987 the last carbed one , can you tell if it has the roller cam/and good 302 heads with out pullimg off the valve covers, its all original just under 60,000 miles. thanks
  6. teringer

    spark plugs ?

    just finished a 416 sm block with 9.5 compression where do I start with spark plugs heat ranges for basic street driving /single plane/voodoo cam hyd.513/528. std mopar ign oranrge box?
Back
Top