Search results for query: *

I'm measuring for pushrods on my 470 build with solid lifter cam. I've taken the measurement with checking pushrod at approx zero lash with two threads showing on the Harland Sharp rockers. Should I reduce the pushrod size to account for lash. I think the card is around .018" hot. How does that...

Should I be concerned with the 4th cam bearing that feeds the heads? Neither side is great. Probably 2/3 open at most. It’s gonna be a 400/470 strip mule approx .625 lift.

Any tips to getting a “frozen” block apart? Trying to save this 230 block for my stroker as my 1st block is about 3 thou too large and my 2nd block turns out to have a crack. Found this block a couple hours away and its the right year but in tough shape, lol. Been soaking for a few days. Popped...

Any tips for getting rockers off shafts that were apparently over-torqued on the end bolts without destroying the shafts? The move just to the end and get stuck. I did take a small file and chamfer the holes but didn’t help. Was thinking about trying to put the “egg’d” ends in the vice with alum...

Have a pair of 346's that were home ported years ago & have been on a buddy's shelf. The valve job is/was fresh. They still have the stock 2.08 valves though. I'm already going to have the seats & guides cut for dual springs as I'm running a small solid roller (.555). I really don't want to...

My fresh block got a couple long, vertical scratches in a couple cylinders. Apparently the oil expanders are wrong. Of course I didn't catch it until I knocked a couple pistons in & they were too tight. Everything looked good but the oil expanders don't even fit the bore nevermind the piston...